A06B-6140-H055 电源模块 伺服放大器

【产品详情】

A06B-6140-H055 Alpha I 电源模块 AIPS -55 是 FANUC 制造的伺服放大器。凭借其时尚的设计，它旨在以节省空间的方式完美贴合，因为只有像这样的紧凑型装置才能做到。该电源体积小巧，安装空间节省多达 30%，散发的热量比大型型号少得多。电缆线的长度已缩短，这是节省空间和改善功能的另一项措施。电缆连接器采用更新的架构，可以更轻松地安装到控制板中，从而减少向连接框架的投影。此外，放大器只需要一根电缆即可连接。减少电缆的另一个功能是能够使用更少的外部电缆，因为不再需要它。这是由于包含从电机输出接线端子到法兰的接地连接。这些产品在日本制造，专为商品生产、高级加工和 CNC 铣削使用而设计。它们提供 MRO Electric 的 2 年保修。我们还提供来自其他制造商的电源，例如西门子和控制技术。

电源线现在比以往任何时候都更简单，连接器连接到输入电源线，节省了连接时间。从伺服放大器柜上拆下也将花费更少的时间，因为输入电源线和电机电源线在快速接头上分离。现在，维护您的设备也具有改进的功能，包括以极致简单的方式更换风扇电机，大大减少了更换风扇电机通常所需的时间。更换伺服放大器所需的时间大大减少，因为连接器连接到输入电源线，连接器连接到电机电源线。不仅如此，现在更换伺服放大器后无需执行参考位置返回操作。伺服放大器上的Absolute Pulsecoder中有一个备用电容器，可实现近10分钟的位置检测操作，无需参考位置返回操作。伺服放大器的架构使其必须安装在功率磁性机柜中，其散热器从机柜背面伸出。这样，来自半导体的热量就会被适当地带走，您可以确保热量不会回流到您身上。伺服放大器有一个电容器，有助于平滑电源电路。请注意，当您关闭设备的电源时，它可能仍然有电一会儿。作为安全预防措施，请等待几秒钟让电放电，并且在您看到红色 LED 熄灭之前，任何时候都不要触摸它，这表明电量已消散。

A06B-6140-H055 电源模块 伺服放大器

【英文介绍】

A06B-6140-H055 Alpha I Power module AIPS-55 is a servo amplifier manufactured by FANUC. With its stylish design, it aims to fit perfectly in a space-saving way, as only a compact device like this can. The power supply is compact, saves up to 30 percent of installation space, and emits much less heat than larger models. The length of the cable has been reduced, which is another measure to save space and improve functionality. The cable connector has an updated architecture that allows it to be more easily installed into the control board, reducing the projection into the connecting frame. In addition, the amplifier only requires a single cable to connect. Another feature of reduced cable is the ability to use less external cable because it is no longer needed. This is due to the inclusion of a ground connection from the motor output terminal to the flange. These products are manufactured in Japan and designed for use in commodity production, advanced machining and CNC milling. They come with a 2-year warranty on the MRO Electric. We also supply power supplies from other manufacturers, such as Siemens and Control Technologies.

Power cords are now simpler than ever, with connectors connected to the input power cord, saving connection time. It will also take less time to remove from the servo amplifier cabinet because the input power cord and motor power cord are separated at the quick connector. Now, maintaining your equipment also has improved features, including replacing the fan motor in an extremely simple way, greatly reducing the time it usually takes to replace the fan motor. The time required to replace the servo amplifier is greatly reduced because the connector is connected to the input power cord and the connector is connected to the motor power cord. In addition, there is now no need to perform a reference position return operation after replacing the servo amplifier. There is a spare capacitor in the Absolute Pulsecoder on the servo amplifier that enables nearly 10 minutes of position detection operations without reference to the position return operation. The architecture of the servo amplifier makes it necessary to be installed in a power magnetic cabinet with its radiator protruding from the back of the cabinet. This way, the heat from the semiconductor is properly taken away and you can be sure that the heat doesn't flow back to you. The servo amplifier has a capacitor that helps smooth the power supply circuit. Note that when you turn off the power to your device, it may still have power for a while. As a safety precaution, wait a few seconds for the electricity to discharge, and do not touch the red LED at any time until you see it go off, which indicates that the charge has dissipated.

A06B-6140-H055 电源模块 伺服放大器

【其他型号推荐】