ABB 70BA01C-S-HESG447260R2 单通道I/O

【产品详情】

HESG447260R2 70BA01C-S ABB 

HESG447260R2 70BA01C-S技术文献：

选择I/O的目的是提供最大的

项目对后期变更的灵活性和弹性。

这个单通道I/O解决方案由

包括以太网字段在内的几个组件

通信接口(FCI)，即I/O模块

终端单元(MTU)和信号调理模块(SCM)。启用以太网FCI

选择I/O单通道模块和

传统的S800多通道模块要比

连接到工业以太网I/O网络

如果转换器应在公共低压线路，例如在欧洲有 400 VAC。这样的线路具有接地的中性线

导体。ABB为400 VAC提供合适的三相滤波器。适用于 440 VAC 公共低压线路欧洲以外地区提供 500 VAC 滤波器。针对实际电机电流优化滤波器：

IFilter = 0.8 • IMOT 最大值;系数0.8与电流纹波有关。500 VAC 到 1000 VAC 的线路不是公共线路。它们是工厂内的本地网络，它们

请勿提供敏感的电子设备。因此，转换器不需要EMC滤波器，如果它们需要运行500 VAC 及以上。

ABB 70BA01C-S-HESG447260R2 单通道I/O

【英文介绍】

HESG447260R2 70BA01C-S ABB

HESG447260R2 70BA01C-S Technical Literature:

I/O is selected with the aim of providing maximum

Flexibility and resilience of the project to subsequent changes.

This single channel I/O solution consists of

Several components, including the Ethernet field

Communication Interface (FCI), I/O module

Terminal Unit (MTU) and Signal Conditioning module (SCM). Enable Ethernet FCI

Select the I/O single-channel module and

The traditional S800 multi-channel module is much less

Connect to an industrial Ethernet I/O network

If the converter should be on a public low voltage line, for example in Europe there is 400 VAC. Such a line has a grounded neutral line

A conductor. ABB offers suitable three-phase filters for 400 VAC. 500 VAC filters are available for 440 VAC public low voltage lines outside Europe. Filter optimization for actual motor current:

IFilter = 0.8 • Maximum IMOT; The coefficient 0.8 is related to the current ripple. The 500 VAC to 1000 VAC line is not a public line. They're local networks inside the plant. They're

Do not provide sensitive electronic devices. Therefore, converters do not require EMC filters if they need to run 500 VAC and above.

ABB 70BA01C-S-HESG447260R2 单通道I/O

【其他型号推荐】