>>>>>型号:500BIO01-1MRB150005R1J | 工程站模块 | 具有较高的灵活性
[产品说明]
品牌： ABB
型号：500BIO01-1MRB150005R1J
产品类型：工程站模块
付款方式：电汇，西联
汇款 装运港：中国厦门
交货时间：1-3个工作日
条件：全新和 100% 原始
保修：12 个月
500BIO01-1MRB150005R1J工程站模块具有以下特点和优势：
模块化设计：工程站模块采用模块化设计，各个模块可以独立生产、运输和安装，便于现场组装和调试。
快速安装：500BIO01-1MRB150005R1J由于采用了模块化设计，工程站模块的安装速度通常较快，可以大大缩短工程建设周期。
灵活性高：工程站模块可以根据不同的工程需求进行组合和配置，具有较高的灵活性和适应性。
质量可控：500BIO01-1MRB150005R1J工程站模块在工厂内进行生产和测试，质量更容易得到控制和保证。
主要特点：
●低阻抗母线保护
●存根和t区保护
●双索引，功能可靠性高
待定的测量标准:稳定差分电流算法，定向电流比较算法
●逐相测量
●降低CT性能要求
●即使在故障情况下也具有高的过故障稳定性CT饱和
●全固态母线复制品
●无需切换CT电路
●只有一个硬件版本额定电流为1和5a所有辅助电源电压之间48 vdcand250vdc标称频率为50,60和16.7 Hz
●短的倾卸时间独立植物的大小或形态集中布置:安装硬件在一个或几个隔间里
作用：
●断路器故障保护(也可单独使用)可无母线保护操作)
●末端故障保护
●定时过流保护
●断路器极差
●电流和电压释放标准
●电力系统扰动记录电压
●单独测量阻抗建立网络
●与变电站监控通信和控制系统(IEC 61850-8- 11Iec 60870-5-1031
●内部人性化人机交互带显示屏的脸
●中央设备冗余供电和/或隔间单位
[其他型号推荐]
>>>>> Model :500BIO01-1MRB150005R1J | The engineering station module | has high flexibility
Brand: ABB
Model: 500BIO01-1MRB150005R1J
Product type: Engineering station module
Payment method: Wire transfer, Western Union
Port of shipment for remittance: Xiamen, China
Delivery time: 1-3 working days
Condition: New and 100% original
Warranty: 12 months
500BIO01-1MRB150005R1J Engineering station module has the following features and advantages:
Modular design: The engineering station module adopts modular design, and each module can be independently produced, transported and installed, which is convenient for on-site assembly and debugging.
Fast installation: 500BIO01-1MRB150005R1J Due to the modular design, the installation speed of the engineering station module is usually faster, which can greatly shorten the engineering construction cycle.
High flexibility: the engineering station module can be combined and configured according to different engineering requirements, with high flexibility and adaptability.
Quality control: The 500BIO01-1MRB150005R1J engineering station module is produced and tested in the factory, and the quality is easier to be controlled and guaranteed.
Main features:
● Low impedance busbar protection
● Stub and T-zone protection
● Double index, high functional reliability
The measurement standards to be determined are: stable differential current algorithm, directional current comparison algorithm
● Phase by phase measurement
● Reduce CT performance requirements
● High over-fault stability CT saturation even under fault conditions
● Full solid bus replica
● No need to switch CT circuit
● Only one hardware version is rated for current 1 and 5a all auxiliary supply voltages between 48 vdcand250vdc nominal frequencies of 50,60 and 16.7 Hz
● Short dumping time independent of plant size or form centralized arrangement: Install hardware in one or several compartments
Functions:
● Circuit breaker fault protection (can also be used alone) can be operated without bus protection)
● End fault protection
● Timed overcurrent protection
● Circuit breaker poor
● Current and voltage release standards
● Power system disturbance recording voltage
● Individual impedance measurement to establish a network
● Communication and control system for substation monitoring (IEC 61850-8-11 IEC 60870-5-1031)
● Internal human-computer interaction with a display face
● Central equipment redundant power supply and/or compartmented units
