DO818 3BSE069053R1 32通道24v数字输出模块 具有过压和过温保护

☆型号：DO818  3BSE069053R1 32通道24v数字输出模块 具有过压和过温保护

【产品详情】

DO818是用于S800 I/O的32通道24v数字输出模块。该模块有16个数字输出。输出电压范围12 ~ 32伏，最大连续输出电流0.5 A。输出具有短路、过压和过温保护。输出分为两个单独隔离的组，每组有16个输出通道和一个电压监控输入。每个输出通道由短路和过温保护的高侧驱动器、EMC保护元件、电感负载抑制、输出状态指示LED和光学隔离屏障组成。如果电压消失，过程电压监控输入给出通道错误信号。错误信号可以通过ModuleBus读取。

特点和优点

32路24v直流。

2个隔离组(RIV50V)， 16路，每组1路工艺电压监控输入

工艺电压范围为12-32V dc(名义24V dc)，最大连续输出电流为每通道0.5A

☆型号：DO818  3BSE069053R1 32通道24v数字输出模块 具有过压和过温保护

【英文介绍】

The DO818 is a 32-channel 24v digital output module for the S800 I/O. The module has 16 digital outputs. The output voltage ranges from 12 to 32 volts, and the maximum continuous output current is 0.5 A. The output is protected against short circuit, overvoltage and overtemperature. The outputs are divided into two separate, isolated groups, each with 16 output channels and a voltage monitoring input. Each output channel consists of high side drivers for short circuit and overtemperature protection, EMC protection elements, inductive load suppression, output status indicator leds and optical isolation barriers. If the voltage disappears, the process voltage monitoring input gives a channel error signal. The error signal can be read by the ModuleBus.

Features and advantages

32 channels 24v DC.

2 isolation groups (RIV50V), 16 channels, each group 1 process voltage monitoring input

The process voltage range is 12-32V dc(nominal 24V dc) with a maximum continuous output current of 0.5A per channel

☆型号：DO818  3BSE069053R1 32通道24v数字输出模块 具有过压和过温保护

【其他型号推荐】