Woodward 8235-361 集成电动执行器 允许机械行程

【产品详情】

8235-361 型号由伍德沃德生产，是 ProAct 和 ProAct Plus 系列执行器和驱动器的一部分。该型号与 PISC II 执行器一起使用，该执行器的标称功率为 24 VDC，最大功耗为 125 瓦。该型号使用的标称管道尺寸为 135。该型号是PISC ITB（集成节气门体），表示它是一种带有集成电动执行器的节气门，用于气体发动机的空气/燃料或节气门空气。

PISC II 和 8235-361 型号允许机械行程，典型行程在 73 到 77 度之间。请注意，PISC II 型号的重量约为 11 公斤或约 25 磅，因此在安装时，需要有既能承受执行器重量又能承受模型本身重量的支架，即大约 36 磅本身。安装后，8235-361 型号将与 PISC II 型执行器一起安装在阀法兰上。 

安装和操作 8235-361 和 PISC II 执行器时，可以使用多种手册。ProAct ISC 集成速度控制执行器型号 I 至 IV 手册 26246 描述了 PISC II 型号及其连接的 ProAct 型号的用途，包括但不限于安装和有关型号接线所需的信息。

Woodward 8235-361 集成电动执行器 允许机械行程

【英文介绍】

Models 8235-361 are manufactured by Woodward and are part of the ProAct and ProAct Plus series of actuators and drives. This model is used with the PISC II actuator, which has a nominal power of 24 VDC and a maximum power consumption of 125 watts. The nominal pipe size used in this model is 135. The model is PISC ITB (Integrated Throttle Body), indicating that it is a throttle with an integrated electric actuator for air/fuel or throttle air for gas engines.

The PISC II and 8235-361 models allow mechanical travel, typically between 73 and 77 degrees. Note that the PISC II model weighs about 11 kg or about 25 LBS, so at the time of installation, it is necessary to have a stand that can bear both the weight of the actuator and the weight of the model itself, which is about 36 LBS itself. After installation, model 8235-361 will be mounted on the valve flange together with the PISC Type II actuator.

There are several manuals available for installing and operating the 8235-361 and PISC II actuators. ProAct ISC Integrated Speed Control Actuator Type I to IV Manual 26246 describes the purpose of the PISC II model and its connected ProAct model, including, but not limited to, information required for installation and wiring of the model.

Woodward 8235-361 集成电动执行器 允许机械行程

【其他型号推荐】