Woodward 8235-198 集成速度控制  节气门体模型

【产品详情】

ProAct 和 ProAct Plus 执行器和驱动器型号 8235-198 是 ProAct 集成速度控制 （PISC） 节气门体模型。该特定型号是PISC II型号，最大流量介质温度为85摄氏度。重心距气门孔中心线的大致位置应不小于一百三十七毫米。该型号设计用于控制通过电动蝶阀的流量输出。 

8235-198 型号用于气体或柴油往复式发动机的应用。该型号可用于各种工业应用，包括机械压缩机和泵。该模型是专门为取代任何传统节流阀而开发的，这意味着该模型不需要在执行器和阀门之间建立任何类型的连接。六缸气门的差异允许各种发动机连接。

8235-198 PISC 节气门体旨在创建一个单独的集成速度控制/执行器模型，无需与执行器和速度控制设备进行多个链接。操作此型号时使用的最佳手册是具有集成速度控制和节气门体 （PISC ITB） 和 P 系列位置控制器的 26265 ProAct 执行器以及 25182 能量控制生产信息指南。

Woodward 8235-198 集成速度控制  节气门体模型

【英文介绍】

ProAct and ProAct Plus actuator and driver models 8235-198 are ProAct Integrated Speed Control (PISC) throttle body models. This particular model is the PISC II model with a maximum flow medium temperature of 85 degrees Celsius. The approximate position of the center of gravity from the center line of the valve hole should not be less than 137 mm. This model is designed to control the flow output through the electric butterfly valve.

Models 8235-198 are used for gas or diesel reciprocating engine applications. This model can be used in a variety of industrial applications, including mechanical compressors and pumps. The model was developed specifically to replace any conventional throttle valve, which means that the model does not require any type of connection between the actuator and the valve. Six-cylinder valve differences allow various engine connections.

The 8235-198 PISC throttle body is designed to create a single integrated speed control/actuator model without multiple links to actuators and speed control devices. The best manual to use when operating this model is the 26265 ProAct actuator with integrated speed control and throttle body (PISC ITB) and P-series position controller and the 25182 Energy Control Production Information Guide.

Woodward 8235-198 集成速度控制  节气门体模型

【其他型号推荐】