Woodward 9907-175 负载共享模块  控制的发动机

【产品详情】

该装置被指定为 9907-175 型号负载共享模块。其主要功能是允许集成伍德沃德动力附件，并允许在 Caterpillar 速度控制器和由伍德沃德组件控制的发动机之间分配负载。9907-175 装置配备的电源范围为 18 至 32 V/DC，或大约 5 瓦。该装置的额定保护措施包括低于 80 V/DC 的欠压和过压，甚至反向电压至负 32 V/DC。9907-175 型号配备三相 PT 输入，可在 100 至 240 V/AC 的电压下线对线运行。

PT输入负载在240 V/AC时每相1.5至1.7 VA之间，在120 V/AC时每相0.4至0.5 VA之间。该装置的标准尺寸为长度为 273.6 毫米（10.8 英寸）、宽度为 214.1 毫米（8.4 英寸）、高度为 59.2 毫米（2.3 英寸）。它有一个坚韧的米色外观。但是，不宜在易产生潮湿和灰尘的地方使用。

Woodward 9907-175 负载共享模块  控制的发动机

【英文介绍】

The unit is designated as a load sharing module of Model 9907-175. Its main function is to allow the integration of Woodward power accessories and to allow the distribution of load between the Caterpillar speed controller and the engine controlled by Woodward components. The 9907-175 device is equipped with a power supply range of 18 to 32 V/DC, or approximately 5 watts. The unit's protection ratings include undervoltage and overvoltage below 80 V/DC, and even reverse voltage to negative 32 V/DC. Models 9907-175 are equipped with a three-phase PT input for line-to-line operation at voltages from 100 to 240 V/AC.

PT input loads are between 1.5 and 1.7 VA per phase at 240 V/AC and between 0.4 and 0.5 VA per phase at 120 V/AC. The standard dimensions of the device are 273.6 mm (10.8 in) in length, 214.1 mm (8.4 in) in width, and 59.2 mm (2.3 in) in height. It has a tough beige appearance. However, it should not be used in places prone to moisture and dust.

Woodward 9907-175 负载共享模块  控制的发动机

【其他型号推荐】