Woodward 8440-1977   主同步器和负载控制 

【产品详情】

主同步器和负载控制 （MSLC-2） 系列 部件号 8440-1977 是 MSLC-2 系列中的控制器之一。要使这部分正常工作，运行控制器所需的电源为 12/20 Vdc 或 8 到 40 Vdc。 将电源连接到控制器时，请确保电源严格连接到端子 63。

控制单元 8440-1977 可以在同步器模式下使用，请确保在同步器模式下使用控制器时，操作员会考虑两个系统内的以下五个条件; 旋转方向、频率、电压的相位角、相位数和电压幅度;如果考虑到这些条件，控制器的操作应该平稳运行。

在控制器运行期间，操作和存储温度是控制正常运行的关键。设备的存储温度应在零下四十到八十五摄氏度的范围内;设备的工作温度应该在零下四十到七十摄氏度的范围内。使用控制器时具有不同的温度范围可能会导致发生潜在错误，过热是可能发生的主要错误之一。

 Woodward 8440-1977   主同步器和负载控制 

【英文介绍】

The Master Synchronizer and Load Control (MSLC-2) series is available at AX Control INC. Purchased, part number 8440-1977 is one of the controllers in the MSLC-2 family. For this part to work properly, the power required to run the controller is 12/20 Vdc or 8 to 40 Vdc. When connecting the power supply to the controller, ensure that the power supply is strictly connected to terminal 63.

The control unit 8440-1977 can be used in synchronizer mode, make sure that when using the controller in synchronizer mode, the operator takes into account the following five conditions in both systems; Rotation direction, frequency, voltage phase Angle, phase number and voltage amplitude; If these conditions are taken into account, the operation of the controller should run smoothly.

During controller operation, operating and storage temperature is the key to control normal operation. The storage temperature of the equipment should be in the range of minus 40 to 85 degrees Celsius; The operating temperature of the equipment should be in the range of minus 40 to 70 degrees Celsius. Having different temperature ranges when using controllers can lead to potential errors, with overheating being one of the main errors that can occur.

 Woodward 8440-1977   主同步器和负载控制 

【其他型号推荐】