Woodward 9905-363 同步器和负载控制模块

【产品详情】

该装置是伍德沃德公司数字同步器和负载控制模块或 DSLC 模块系列的一部分。伍德沃德公司是世界上历史最悠久、领先的此类设备制造商。DSLC系列是作为面向微处理器的同步器和控制单元开发的，基于三相交流发电机的功能。

本单位以数字识别代码 9905-363 列出。其独特的规格包括 +/- 3.0 V/DC 的速度偏置输出。这表明该型号通过辅助输入与标准伍德沃德数字和模拟速度控制兼容。该 DSLC 模块的电压输入范围为 150 至最大 300 V/AC。

9905-363 装置采用开放式三角形 PT 配置设计。这是主要用于北美硬件的开关设备配置，由 A-B 和 B-C 相之间的两个 PT 组成，B 相接地到开关设备接地。

伍德沃德的标准规格包括低至 -40 C 至 70 C（-40 至 158 F）的工作温度范围。该装置的金属在受到过量水蒸气影响之前可以处理的相对湿度为 95%，在 38 C （100 F） 时。

Woodward 9905-363 同步器和负载控制模块

【英文介绍】

The unit is part of Woodward's family of digital synchronizers and load control modules, or DSLC modules. Woodward is the world's oldest and leading manufacturer of such equipment. The DSLC series was developed as a microprocessor-oriented synchronizer and control unit, based on the functionality of a three-phase alternator.

The units are listed under the numeric identification code 9905-363. Its unique specifications include a speed offset output of +/- 3.0V /DC. This indicates that the model is compatible with standard Woodward digital and analog speed controls via auxiliary inputs. The DSLC module has a voltage input range of 150 to a maximum of 300 V/AC.

The 9905-363 unit is designed in an open triangular PT configuration. This is A switchgear configuration primarily used in North American hardware and consists of two PT's between the A-B and B-C phases, with the B phase grounded to the switchgear ground.

Woodward's standard specifications include an operating temperature range as low as -40 C to 70 C (-40 to 158 F). The relative humidity that the metal of the device can handle before being affected by excess water vapor is 95%, at 38 C (100 F).

Woodward 9905-363 同步器和负载控制模块

【其他型号推荐】