Woodward 9905-096 发电机装载控制单元

【产品详情】

该装置列在数字 ID “9905-096” 下，是自动发电机装载控制单元。该设备由该国历史最悠久的电机控制制造商伍德沃德公司开发和生产。伍德沃德 AGLC 装置设计用于与一组负载分配和速度控制模块一起使用。

9905-096 被安装在发电机系统中，以便自动控制发动机/发电机组的装载和卸载。当发动机/发电机组与负载共享装置并联时，它能够实现无颠簸的传输。当断路器的辅助触点闭合时，9905-096 型号通电。它将迎面而来的发电机的负载共享线上的可用电位与系统的电位进行比较。

9905-096 型号配备了基本负载设置和卸载斜坡设置。“基本负载”设置会导致负载以负载斜坡速率更改为基本负载设置。然后，负载将自行改变，向上或向下移动到基本负载位置。卸载斜坡设置使 9905-096 以用户选择的斜坡速率斜坡下降，无论开关是保持打开状态还是再次关闭。这些斜坡可以很容易地调整，范围从 5 秒到 5 分钟不等。

Woodward 9905-096 发电机装载控制单元

【英文介绍】

This device is listed under the number ID "9905-096" and is an automatic generator loading control unit. The device was developed and produced by Woodward, the country's oldest motor control manufacturer. The Woodward AGLC unit is designed for use with a set of load distribution and speed control modules.

The 9905-096 is installed in the generator system to automatically control the loading and unloading of the engine/generator set. When the engine/generator set is in parallel with the load sharing device, it enables bump-free transmission. When the auxiliary contact of the circuit breaker is closed, model 9905-096 is powered on. It compares the available potential on the load sharing line of the oncoming generator with the potential of the system.

Models 9905-096 are equipped with base load Settings and unload ramp Settings. The Base load setting causes the load to change to the base load setting at the load ramp rate. The load will then change on its own, moving up or down to the base load position. The unload ramp setting causes the 9905-096 to ramp down at the slope rate chosen by the user, regardless of whether the switch remains on or is turned off again. These ramps can be easily adjusted and range from 5 seconds to 5 minutes.

Woodward 9905-096 发电机装载控制单元

【其他型号推荐】