Woodward 9905-009 SPM-A 同步器部件

【产品详情】

9905-009 装置配备了一套标准的伍德沃德 SPM-A 规格。本机的频率范围是标准的 50 到 60 赫兹。该单元能够进行电压匹配，并具有高达 10% 的容量，是该系列中最多的。该单元能够提供的相位角包括一定的余量，给定正负系数 10 度。为了检查发电机的相位角和频率，电压输入首先被施加到单独的信号调节器电路。每个信号调理器都能够改变电压输入信号的形状，以便准确测量。9905-009 可以配备一个用户安装的开关，可以控制继电器驱动器。该开关需要连接到同步器触点 10 到 13。四个可用的操作位置是关闭、运行、检查和允许。给定 10 度的正负系数。

为了检查发电机的相位角和频率，电压输入首先被施加到单独的信号调节器电路。每个信号调理器都能够改变电压输入信号的形状，以便准确测量。9905-009 可以配备一个用户安装的开关，可以控制继电器驱动器。该开关需要连接到同步器触点 10 到 13。四个可用的操作位置是关闭、运行、检查和允许。给定 10 度的正负系数。为了检查发电机的相位角和频率，电压输入首先被施加到单独的信号调节器电路。

每个信号调理器都能够改变电压输入信号的形状，以便准确测量。9905-009 可以配备一个用户安装的开关，可以控制继电器驱动器。该开关需要连接到同步器触点 10 到 13。四个可用的操作位置是关闭、运行、检查和允许。每个信号调理器都能够改变电压输入信号的形状，以便准确测量。9905-009 可以配备一个用户安装的开关，可以控制继电器驱动器。该开关需要连接到同步器触点 10 到 13。四个可用的操作位置是关闭、运行、检查和允许。每个信号调理器都能够改变电压输入信号的形状，以便准确测量。9905-009 可以配备一个用户安装的开关，可以控制继电器驱动器。该开关需要连接到同步器触点 10 到 13。四个可用的操作位置是关闭、运行、检查和允许。

Woodward 9905-009 SPM-A 同步器部件

【英文介绍】

The 99005-009 unit is equipped with a standard Woodward SPM-A specification. The frequency range of the unit is standard 50 to 60 Hz. The unit is capable of voltage matching and has a capacity of up to 10%, the most in the series. The phase Angle that the unit can provide includes a certain margin, given a positive and negative coefficient of 10 degrees. To check the phase Angle and frequency of the generator, the voltage input is first applied to a separate signal regulator circuit. Each signal conditioner is capable of changing the shape of the voltage input signal for accurate measurement. The 9905-009 can be equipped with a user-mounted switch that can control the relay driver. The switch needs to be connected to synchronizer contacts 10 to 13. The four available action positions are off, Run, Check, and Allow. Given a positive and negative coefficient of 10 degrees.

To check the phase Angle and frequency of the generator, the voltage input is first applied to a separate signal regulator circuit. Each signal conditioner is capable of changing the shape of the voltage input signal for accurate measurement. The 9905-009 can be equipped with a user-mounted switch that can control the relay driver. The switch needs to be connected to synchronizer contacts 10 to 13. The four available action positions are off, Run, Check, and Allow. Given a positive and negative coefficient of 10 degrees. To check the phase Angle and frequency of the generator, the voltage input is first applied to a separate signal regulator circuit.

Each signal conditioner is capable of changing the shape of the voltage input signal for accurate measurement. The 9905-009 can be equipped with a user-mounted switch that can control the relay driver. The switch needs to be connected to synchronizer contacts 10 to 13. The four available action positions are off, Run, Check, and Allow. Each signal conditioner is capable of changing the shape of the voltage input signal for accurate measurement. The 9905-009 can be equipped with a user-mounted switch that can control the relay driver. The switch needs to be connected to synchronizer contacts 10 to 13. The four available action positions are off, Run, Check, and Allow. Each signal conditioner is capable of changing the shape of the voltage input signal for accurate measurement. The 9905-009 can be equipped with a user-mounted switch that can control the relay driver. The switch needs to be connected to synchronizer contacts 10 to 13. The four available action positions are off, Run, Check, and Allow.

Woodward 9905-009 SPM-A 同步器部件

【其他型号推荐】