WOODWARD 5466-409 用于单工系统

【产品详情】

微网奔腾CPU模块5466-409在233 MHz上运行，并具有64 MB的RAM。通常与本机一起使用的应用软件是AppManager。5466-409模块将用于单工系统。

MicroNet 数字控制系列中有许多 CPU 型号，这个特定型号 5466-409 是奔腾 CPU。通常，MicroNet 系列中的型号可以在冗余或单工模式下运行，但该模块只能在单工系统中运行，安装后它将位于机箱的扩展机架中。当奔腾 CPU 位于扩展机架中时，必须与主收发器 （XCVR） 和远程 XCVR 一起使用。

当用作单个CPU单元时，5466-409模块的主要特点是它能够通过双RS-232串行端口以及单个以太网端口进行高处理。该模型还具有特定的工作温度限制，这些限制为 <> 到 <> 摄氏度，任何与这些限制不同的限制都可能导致操作错误和故障。与此模块一起使用的典型服务工具是AppManager服务工具，用于通过连接的以太网启动和加载应用程序。

WOODWARD 5466-409 用于单工系统

【英文介绍】

The Microgrid Pentium CPU module 5466-409 runs on 233 MHz and has 64 MB of RAM. The application software commonly used with the native is AppManager. Modules 5466-409 will be used for simplex systems.

There are many CPU models in the MicroNet digital control family, and this particular model 5466-409 is a Pentium CPU. Typically, models in the MicroNet family can operate in redundancy or simplex mode, but the module can only operate in a simplex system, and after installation it will be located in an extension rack of the case. When the Pentium CPU is located in an expansion rack, it must be used with the primary transceiver (XCVR) and the remote XCVR.

When used as a single CPU unit, the main feature of the 5466-409 module is its ability to perform high processing via dual RS-232 serial ports as well as a single Ethernet port. The model also has specific operating temperature limits, which are <> to <> degrees Celsius, and anything different from these limits can lead to operational errors and failures. A typical service tool used with this module is the AppManager service tool for starting and loading applications over a connected Ethernet.

WOODWARD 5466-409 用于单工系统

【其他型号推荐】