WOODWARD 5501-466 数字控制系列 电源板
【产品详情】
电源板 5501-466 是单工 PS,是 MicroNet 数字控制系列的一部分。该特定电源板在 120 VAC/VDC 输入下工作。5501-466 板的标准与前面的模块相同。
5501-466是另一个MicroNet Simplex电源板,该型号将在一百二十伏直流电或伏特交流电的电压下工作。 该板具有正确操作板所需的规格,VAC 和 VDC 对输入功率保险丝/断路器额定值都有特定要求。VDC 输入的断路器额定值是 <> 安培的时间延迟,VAC 的断路器额定值是 <> 安培的时间延迟。
该板具有两种不同的工作范围,具体取决于所使用的输入。如果 5501-466 板与直流输入一起使用,则工作范围为 100 至 150 VDC,则有特定的最大保险丝或时间延迟和导线尺寸,时间延迟已在上面提到。该板的电线尺寸需要是十四美式线规或两毫米半平方毫米.当谈到如何在 <> 摄氏度的环境温度下将电线额定为 <> 摄氏度时。
将主板插入单工机箱后,它将位于机箱的左侧,并占用三个插槽空间。当 5501-466 与冗余电源一起使用时,最多可与一块单工电源板一起使用。
安装和供电该模块所需的所有信息都可以在 26166 手册的三个版本以及 26167 手册的第一个版本中找到,这些版本都可以在上面的手册选项卡中找到。
WOODWARD 5501-466 数字控制系列 电源板
【英文介绍】
The power board 5501-466 is a simplex PS, part of the MicroNet digital control family. This particular power supply board operates with 120 VAC/VDC input. The 5501-466 panels are of the same standard as the previous modules.
The 5501-466 is another MicroNet Simplex power supply board, this model will operate at a voltage of one hundred twenty volts direct current or volts alternating current. The board has the specifications needed to properly operate the board, and both VAC and VDC have specific requirements for input power fuse/breaker ratings. Circuit breaker ratings for VDC input are <> amps of time delay, and circuit breaker ratings for VAC are <> amps of time delay.
The board has two different ranges of operation, depending on the input used. If the 5501-466 board is used with a DC input, with an operating range of 100 to 150 VDC, there is a specific maximum fuse or time delay and wire size, the time delay has been mentioned above. The wire size of the board needs to be fourteen American wire gauge or two millimetres half square. When it comes to how to rating wires to <> degrees Celsius at ambient temperatures of <> degrees Celsius.
After inserting the motherboard into the simplex case, it will be located on the left side of the case and take up three slot Spaces. When used with a redundant power supply, the 5501-466 can be used with up to one simplex power supply board.
All the information needed to install and power the module can be found in the three versions of the 26166 manual as well as the first version of the 26167 manual, all of which can be found in the manual TAB above.
WOODWARD 5501-466 数字控制系列 电源板
【其他型号推荐】
PR6426/000-101 | EPRO | 前置器及传感器 | BENTLY 330850-90-05 | 按键屏 | Bently Nevada |
PR6426/000-100 | EPRO | 前置器及传感器 | BENTLY 330850-90-00 | 红外通讯 | Bently Nevada |
PR6426/000-041 | EPRO | 前置器及传感器 | BENTLY 330850-51-05 | S型热电偶 | Bently Nevada |
PR6426/000-031 | EPRO | 前置器及传感器 | BENTLY 330850-50-CN | 端口号 | Bently Nevada |
PR6426/000-030 | EPRO | 前置器及传感器 | BENTLY 33080-51-00 | 模拟输入输出 | Bently Nevada |
PR6426/000-021 | EPRO | 前置器及传感器 | BENTLY 3308012806095030 | 缓冲板 | Bently Nevada |
PR6426/000-020 | EPRO | 前置器及传感器 | BENTLY 3308012805145030 | 直流调速器主控制cpu板 | Bently Nevada |
PR6426/000-010 | EPRO | 前置器及传感器 | BENTLY 3308012804130030 | 输入模块横河卡件 | Bently Nevada |
PR6426/000-001 | EPRO | 前置器及传感器 | BENTLY 3308012804110030 | 主接触器 | Bently Nevada |
PR6426/000-000 | EPRO | 前置器及传感器 | BENTLY 3308012804090030 | 触摸屏一体机 | Bently Nevada |
PR6425/010-A20 | EPRO | 前置器及传感器 | BENTLY 3308012800150020 | 以太网模件 | Bently Nevada |
PR6425/010-141 | EPRO | 前置器及传感器 | BENTLY 3308012800105030 | 火检放大器底座 | Bently Nevada |
PR6425/010-140 | EPRO | 前置器及传感器 | BENTLY 3308011600070020 | HTL脉冲编码器接口模块 | Bently Nevada |
PR6425/010-130 | EPRO | 前置器及传感器 | BENTLY 330780-91-05 | 串行接口模件 | Bently Nevada |
PR6425/010-110 | EPRO | 前置器及传感器 | BENTLY 330780-91-00 | 以太网适配器 | Bently Nevada |