WOODWARD 5466-5027 单工高密度模拟量 I/O 模块 数字控制系列

【产品详情】

伍德沃德微网单工高密度模拟量 I/O 模块 5466-5027 可操作多达 4 个 20-4 mA 输入和多达 20 个 <>-<> mA 输出。本机在前面板上有一个 LED，可通过闪烁指示多达 <> 个不同的故障。

Simplex 高密度模拟 I/O Dataforth 模块 5466-5027 是 Woodward Inc 在科罗拉多州柯林斯堡生产的 MicroNet 数字控制系列的一部分。当该模块同时涉及输入和输出额定值时，可以使用该模块的规格。例如，输入和输出额定值的精度之间有1.0%的精度，它们在满量程下的工作电流为25-0 mA，输入软件的校准为1.0%，输出软件的校准为2.<>%。

型号 5466-50027 兼容向后使用时向后使用，本机必须与部件号 5466-425 一起使用。应该注意的是，在与非隔离器件接口时，应非常小心地防止接地环路和其他故障。模块前面板上的 LED 能够指示多达 <> 个不同的故障，这些故障由 LED 上的闪烁次数指示。例如，如果 LED 闪烁多达 <> 次，则表示 RAM 内存出现故障，如果 LED 闪烁多达 <> 次，则表示 AO DAC 已超时。

以前有两个版本的高密度模拟量I/O，前两个版本与5466-5027模块的区别在于应用软件，该模块具有Dataforth软件，而以前的模块没有。有关此模块的更多信息，请参阅 26166 手册，手册有三个版本，手册 <> 有一个描述本机功能的表格。

WOODWARD 5466-5027 单工高密度模拟量 I/O 模块 数字控制系列

【英文介绍】

The Woodward Microgrid simo High density analog I/O module 5466-5027 can operate up to 4 20-4 mA inputs and up to 20 <>-<> mA outputs. The unit has an LED on the front panel that can indicate up to <> different faults by flashing.

The Simplex high density analog I/O Dataforth module 5466-5027 is part of the MicroNet digital control family manufactured by Woodward Inc in Fort Collins, Colorado. The specifications of the module can be used when the module involves both input and output ratings. For example, there is an accuracy of 1.0% between the accuracy of the input and output ratings, they operate at a current of 25-0 mA at full scale, the calibration of the input software is 1.0%, and the calibration of the output software is 2.<>%.

Model 5466-50027 is compatible with backwards use when backwards use, the unit must be used with part number 5466-425. It should be noted that great care should be taken to prevent ground loops and other failures when interfacing with non-isolated devices. The LED on the front panel of the module is capable of indicating up to <> different faults, which are indicated by the number of flashes on the LED. For example, if the LED blinks up to <> times, it means that the RAM memory is faulty, and if the LED blinks up to <> times, it means that the AO DAC has timed out.

There have been two previous versions of high-density analog I/O, and the difference between the first two versions and the 5466-5027 module is the application software, which has Dataforth software, while the previous module does not. For more information on this module, please refer to the manual 26166, which comes in three versions, the manual <> has a table describing the functions of the unit.

 WOODWARD 5466-5027 单工高密度模拟量 I/O 模块 数字控制系列

【其他型号推荐】