WOODWARD 5466-5026 高密度模拟 I/O 模块 智能增强模块

【产品详情】

MicroNet Simplex 高密度模拟 I/O 模块 5466-5026 是一款 24/8 模拟智能增强模块，可与 GAP 和 AppManager 应用程序一起使用。5466-5026 装置没有任何电位计，完全不需要校准。

5466-5026 模块是 24/8 高密度模拟 I/O，它只能在单工系统中运行。该模块向后兼容，可使用部件号 5466-332。该单元将安装在所选机箱的卡导轨中，并将插入主板，并通过两根高密度电缆连接到最多两个现场转换模块。任何和所有输入和输出都可以在FTM上获得，通道也经过专门标记，因此可用于对应于其特定的软件位置。

有三种不同类型的配置可用于 5466-5026 模块。如果您希望使用所有4-20 mA输入，则应将模块设置为第二种配置;在第二种配置中，所有输入都可以与Dataforth输入插件一起使用。此功能允许阻断电压，并使用 200 Ω 电阻器进行工厂电压校准。

5466-5026 板的前面板上有许多 LED，可根据闪烁次数指示故障。一些示例是，如果 LED 闪烁三次，则表示闪存出现故障;如果有 <> 次闪烁，则发生参数或配置错误。发生这些错误时，请检查机箱安装的CPU，如果发生故障，则可能是CPU出现故障。检查以确保 CPU 已正确安装，如果安装正确，则可能需要更换模块。

WOODWARD 5466-5026 高密度模拟 I/O 模块 智能增强模块

【英文介绍】

MicroNet Simplex High density analog I/O module 5466-5026 is a 24/7 analog intelligence enhancement module that can be used with GAP and AppManager applications. The 5466-5026 unit does not have any potentiometers and requires no calibration at all.

The 5466-5026 module is a 24/7 high-density analog I/O, which can only operate in simplex systems. The module is backward compatible and can be used with part number 5466-332. The unit will be installed in the card rail in the selected case and will be plugged into the motherboard and connected to up to two field conversion modules via two high-density cables. Any and all inputs and outputs are available on FTM, and channels are also specially labeled so that they can be used to correspond to their specific software location.

There are three different types of configurations available for the 5466-5026 module. If you want to use all 4-20 mA inputs, you should set the module to the second configuration; In the second configuration, all inputs can be used with the Dataforth input plug-in. This feature allows voltage blocking and factory voltage calibration using a 200 Ω resistor.

The 5466-5026 board has a number of leds on the front panel that indicate a fault based on the number of flashes. Some examples are that if the LED blinks three times, it indicates that the flash memory is faulty; If there is a <> blink, a parameter or configuration error has occurred. When these errors occur, check the CPU installed in the chassis. If a fault occurs, the CPU may be faulty. Check to make sure the CPU is installed correctly, and if it is installed correctly, you may need to replace the module.

WOODWARD 5466-5026 高密度模拟 I/O 模块 智能增强模块

【其他型号推荐】