WOODWARD 5466-5025 高密度模拟 I/O，具有 0 个可选输入
【产品详情】
Woodward 模块 5466-5025 是一款高密度模拟 I/O，具有 0 个可选输入，5-4 V 或 20-5466 mA。本机可与 RTD 插件一起使用。5025-<>器件将主要用于单工系统。
MicroNet 数字控制器 5466-5025 是一款高密度模拟 I/O 隔离模块。该模块有 600 个可选输入和 24 个输出。该模块的输入范围为 8 至 <> 伏或 <> 至 <> 毫安。输出与输入相同，但也是 <> 欧姆。<>/<> 模拟智能增强模块有三种不同的配置类型，例如这个。该模块具有板载处理器，可自动校准输入输出通道。
此模块的插入将位于所选机箱的卡导轨中，并插入主板。5466-5025 具有与之配合的特定编码器版本，通常此编码器版本将为 5.08 或更高版本。此设备的输入和输出可通过连接的 FTM 访问。有两个 24/8 模拟 FTM 以及两个高密度模拟/离散电缆。如果 5466-5025 模块使用 4-20 mA 输入信号，则使用所需的 200 欧姆电阻，该电阻位于 24/8 模拟模块上。
模拟输出对于该模块也很重要，如果检测到故障，输出源的监视器将返回电流。 如果在操作时在5466-5025上检测到故障，GAP应用程序将通知故障，并禁用通道并在系统计算中停止数据。
WOODWARD 5466-5025 高密度模拟 I/O，具有 0 个可选输入
【英文介绍】
The Woodward module 5466-5025 is a high-density analog I/O with 0 selectable inputs, 5-4 V or 20-5466 mA. This unit can be used with the RTD plug-in. The 5025-<> device will be used primarily in simplex systems.
The MicroNet Digital Controller 5466-5025 is a high-density analog I/O isolation module. The module has 600 optional inputs and 24 outputs. The module has an input range of 8 to <> volts or <> to <> MA. The output is the same as the input, but is also <> ohms. <>/<> Analog Intelligence enhancement modules are available in three different configuration types, such as this one. The module has an onboard processor that automatically calibrates the input and output channels.
The insertion of this module will be located in the card rail of the selected case and inserted into the motherboard. The 5466-5025 has a specific encoder version to work with, which will usually be version 5.08 or later. The input and output of this device can be accessed via a connected FTM. There are two 24/7 analog FTM as well as two high-density analog/discrete cables. If the 5466-5025 module uses a 4-20 mA input signal, use the required 200 ohm resistor, which is located on the 24/7 analog module.
The analog output is also important for this module, and if a fault is detected, the monitor of the output source will return the current. If a fault is detected on 5466-5025 at the time of operation, the GAP application will notify the fault and disable the channel and stop the data in the system calculation.
WOODWARD 5466-5025 高密度模拟 I/O，具有 0 个可选输入
【其他型号推荐】
| PR6426/010-120 | EPRO | 前置器及传感器 | BENTLY 3309010050100200 | 压敏电阻板 | Bently Nevada |
| PR6426/010-110 | EPRO | 前置器及传感器 | BENTLY 3309010018100200 | 检测模块 | Bently Nevada |
| PR6426/010-100 | EPRO | 前置器及传感器 | BENTLY 330900-50-05 | 伺服定位系统 | Bently Nevada |
| PR6426/010-040 | EPRO | 前置器及传感器 | BENTLY 330900-50-00 | TR控制板 | Bently Nevada |
| PR6426/010-030 | EPRO | 前置器及传感器 | BENTLY 3308812808098060 | SOE主模件 | Bently Nevada |
| PR6426/010-020 | EPRO | 前置器及传感器 | BENTLY 3308812800165070 | 环路数据处理模件 | Bently Nevada |
| PR6426/010-010 | EPRO | 前置器及传感器 | BENTLY 330878-90-00 | 计算机接口模件 | Bently Nevada |
| PR6426/010-000 | EPRO | 前置器及传感器 | BENTLY 330877803700 | DCS板 | Bently Nevada |
| PR6426/000-141 | EPRO | 前置器及传感器 | BENTLY 33087601100100 | 可编程控制系统 | Bently Nevada |
| PR6426/000-140 | EPRO | 前置器及传感器 | BENTLY 330854-080-24-05 | ABBIGBT模块 | Bently Nevada |
| PR6426/000-130 | EPRO | 前置器及传感器 | BENTLY 3308510500271000 | 模件总线电缆适配器接口 | Bently Nevada |
| PR6426/000-121 | EPRO | 前置器及传感器 | BENTLY 330851-04-000-023-10-01-05 | 模件总线连接电缆 | Bently Nevada |
| PR6426/000-111 | EPRO | 前置器及传感器 | BENTLY 330851-02-000-070-50-00-05 | 诊断电缆 | Bently Nevada |
| PR6426/000-101 | EPRO | 前置器及传感器 | BENTLY 330850-90-05 | 按键屏 | Bently Nevada |
| PR6426/000-100 | EPRO | 前置器及传感器 | BENTLY 330850-90-00 | 红外通讯 | Bently Nevada |
| PR6426/000-041 | EPRO | 前置器及传感器 | BENTLY 330850-51-05 | S型热电偶 | Bently Nevada |
| PR6426/000-031 | EPRO | 前置器及传感器 | BENTLY 330850-50-CN | 端口号 | Bently Nevada |
