WOODWARD 5466-411 以太网连接器 微网数字控制系列

【产品详情】

5466-411，微网以太网RJ45，有四个标准，ABS，CSA，CE （EMC）和LRS。这是以太网电缆，而不是物理模型。5466-411 用于在主机箱 CPU 模块和扩展机箱远程 RTN 模块之间提供通信。

作为微网数字控制系列的一部分，5466-411 型是 10BaseT RJ45 以太网连接器。该模型由伍德沃德公司设计。此连接器用于许多不同的功能，其中一些功能如下：

多个控件的联网

数据收集

控制配置

上述用途对于连接的微网设备的正常运行非常重要。除了前面提到的功能外，该模块还将完全依赖于控制系统内的IP/TCP分布式输入输出设备的接口。

使用此连接器时，5466-411 型号还必须与以太网现场终端模块 （FTM） 一起使用，以保证以太网设备的稳健运行和信号完整性。以太网FTM不仅需要与双屏蔽以太网蜡烛一起使用，还需要SSTP来保证设备正常运行。

5466-411 模块还用于帮助提供主机箱 CPU 模块和扩展机箱远程实时网络模块之间的通信。此连接器允许来自扩展机箱的输入输出数据，以帮助在主机箱 CPU 中运行 GAP 应用程序。

WOODWARD 5466-411 以太网连接器 微网数字控制系列

【英文介绍】

5466-411, Microgrid Ethernet RJ45, has four standards, ABS, CSA, CE (EMC) and LRS. This is an Ethernet cable, not a physical model. The 5466-411 is used to provide communication between the main box CPU module and the extension box remote RTN module.

As part of the Microgrid digital control family, Model 5466-411 is a 10BaseT RJ45 Ethernet connector. The model was designed by Woodward. This connector is used for many different functions, some of which are as follows:

Networking of multiple controls

Data collection

Control configuration

These uses are important for the proper operation of connected microgrid devices. In addition to the previously mentioned functions, the module will also be completely dependent on the interface of the IP/TCP distributed input/output device within the control system.

When using this connector, the 5466-411 model must also be used with the Ethernet Field Terminal Module (FTM) to ensure robust operation and signal integrity of the Ethernet device. Ethernet FTM not only needs to be used with double-shielded Ethernet candles, but also needs SSTP to ensure the normal operation of the device.

The 5466-411 module is also used to help provide communication between the main box CPU module and the extension box remote real-time networking module. This connector allows input/output data from the extension case to help run GAP applications in the main case CPU.

WOODWARD 5466-411 以太网连接器 微网数字控制系列

【其他型号推荐】