WOODWARD 5466-1245 增强性能的网络 可用于单工或冗余I/O模块

【产品详情】

Woodward MicroNet-Plus CPU5200 Cyber Ready Enhanced Perf 可用于 MicroNet-Plus 或 MicroNet Simplex 操作，该装置将始终安装在插槽 A1 中。5466-1245 设备不能与以太网模块一起使用。

5466-1245 模块是一款具有增强性能的网络读取CPU5200。该模块专门设计为MicroNet-Plus模块，可用于单工或冗余I/O模块。根据 26166V1 手册，当使用本机时，必须冗余使用两个 CPU，它们可以CPU5200或CPU5200L模块，当插入机箱时，它们将位于第一个和最后一个 VME 插槽中，分别标记为 A1 和 A8/A14。机箱只有一个主板，还可以容纳十二个 I/O 插槽、两个 CPU 和两个电源。

如上所述，当 5466-1245 单元需要冗余两个 CPU 时，机箱中的第一个 CPU 用于控制 I/O 模块，称为 SYSCON 或系统控制器。机箱中的第二个 CPU 是备用/备份 CPU，它将从 SYSCON 接收必要的统计信息，如果发生这种情况，备份 CPU 可以在 SYSCON 发生故障时进行控制。有几个 SYSCON 故障的示例如下：

应用程序停止

板载 CPU 电源故障

系统处理器的重置

处理器内核故障

应用程序请求的故障转移

操作 5466-1245 模块时，最好使用手册是 26166V1、26166V2 和 26166V3 手册。26166V1 手册详细介绍了有关CPU5200的信息，而 26166V2 和 26166V3 手册提供了更多一般信息和规格。

WOODWARD 5466-1245 增强性能的网络 可用于单工或冗余I/O模块

【英文介绍】

The Woodward MicronET-Plus CPU5200 Cyber Ready Enhanced Perf is available for Micronet-Plus or MicroNet Simplex operation and the unit will always be installed in slot A1. 5466-1245 Device cannot be used with Ethernet module.

The 5466-1245 module is a network read CPU5200 with enhanced performance. The module is specifically designed as a MicroNet-Plus module and can be used in simplex or redundant I/O modules. According to the 26166V1 manual, when using this machine, two cpus must be used redundantly, they can be CPU5200 or CPU5200L modules, when inserted into the case, they will be located in the first and last VME slots, labeled A1 and A8/A14 respectively. The chassis has only one motherboard and can also accommodate twelve I/O slots, two cpus, and two power supplies.

As mentioned above, when the 5466-1245 unit requires a redundancy of two cpus, the first CPU in the case is used to control the I/O module, called the SYSCON or system controller. The second CPU in the case is the standby/backup CPU, which will receive the necessary statistics from SYSCON, and if this happens, the backup CPU can take control in case SYSCON fails. Examples of several SYSCON failures are as follows:

Application stop

The onboard CPU power supply is faulty

Reset of the system processor

Processor core fault

Failover of application requests

When operating the 5466-1245 module, it is best to use the 26166V1, 26166V2 and 26166V3 manuals. The 26166V1 manual provides detailed information about the CPU5200, while the 26166V2 and 26166V3 manuals provide more general information and specifications.

WOODWARD 5466-1245 增强性能的网络 可用于单工或冗余I/O模块

【其他型号推荐】