5466-1037 WOODWARD 用作单工或冗余模型

【产品详情】

伍德沃德生产的 MicroNet CPU5200L 型号 5466-1037 不支持扩展机箱操作，因为不支持设备上的任何 RTN 端口。该模型能够运行具有相应 GAP 块的 GAP 应用程序，CPUML5200。

MicroNet Digital Controller 5466-1037是由Woodward Incorporated生产的MicroNet CPU5200L，PowerPC MPC5200单元，用作单工或冗余模型。该型号的主要功能之一是摩托罗拉MPC5200处理器以及128 MB或DDR RAM。该装置如此受追捧的原因之一是因为它能够在单工或冗余控制模式下运行。如果设备在冗余模式下运行，强烈建议有一个 FGPA 单元，FGPA 单元允许 VMEbus 从站/主站功能。

5466-1037 型号提供的另一个功能是能够具有实时时钟，设备上的实时时钟由电池供电，不需要设备打开即可工作。不幸的是，如果电池没电了，则用户无法更换，必须由技术人员更换。虽然大多数模块在拆卸或安装设备之前需要关闭电源或断电，但 MicroNet Plus 机箱可以在带电时拆卸或安装。

5466-1037 WOODWARD 用作单工或冗余模型

【英文介绍】

The MicroNet CPU5200L model 5466-1037 manufactured by Woodward does not support extended chassis operation as any RTN ports on the device are not supported. This model is capable of running a GAP application with a corresponding GAP block, CPUML5200.

The MicroNet Digital Controller 5466-1037 is a MicroNet CPU5200L, PowerPC MPC5200 unit manufactured by Woodward Incorporated for use as a simplex or redundant model. One of the main features of this model is the MOTOROLA MPC5200 processor along with 128 MB or DDR RAM. One of the reasons this device is so sought after is because of its ability to operate in simplex or redundant control mode. If the device is operating in redundant mode, it is highly recommended to have an FGPA unit that allows VMEbus slave/master function.

Another feature offered by the 5466-1037 model is the ability to have a real-time clock, the real-time clock on the device is battery-powered and does not require the device to be turned on to work. Unfortunately, if the battery runs out of power, the user cannot replace it and it must be replaced by a technician. While most modules require a power off or power off before removing or installing the device, the MicroNet Plus case can be removed or installed when energized.

5466-1037 WOODWARD 用作单工或冗余模型

【其他型号推荐】