9907-016 控制单元 有九个电位器 WOODWARD

【产品详情】

伍德沃德部分 9907-016 系列 2301A 负载分配和速度控制。额定负载为±5%的均载负载，有<>个电位器控制部分。

控制单元 9907-016 就是其中一种型号，该装置可方便地制成正向和反向作用型号，该装置也可方便地提供低压或高压型号以满足您的需求。打开控件的包装时，请确保在运输过程中没有受到任何损坏，控件框架的损坏会导致控件在控件和原动机的操作过程中出现故障，如果发生损坏并且未修复，则可能导致广泛的人身伤害和潜在的死亡。

解开控件并评估损坏后，可以开始安装。该控制器有九个电位器，需要设置这些电位器，以便原动机正常工作。原动机的稳定运行对于不造成伤害、过热、超速和潜在的死亡至关重要。如果您的原动机运行稳定，那么您可以开始根据额定速度调整电位计，以便原动机可以开始以最佳速度运行。

控制器上的复位和增益电位器也会影响原动机的速度，在调节增益时，原动机的速度有微小和暂时的变化，您可以慢慢转动增益电位器，以尽量减少可能的变化。

如果在启动期间操作原动机时超速运行，原因可能是斜坡调整，如果是斜坡调整，您可以增加控制器上的斜坡时间，这将降低加速度。

9907-016 控制单元 有九个电位器 WOODWARD

【英文介绍】

Woodward Part 9907-016 Series 2301A Load distribution and speed control. The rated load is ±5% of the average load, with <> potentiometer control parts.

The control unit 9907-016 is one such model, which can be easily made into forward and reverse acting models, and the unit can also be conveniently provided in low or high pressure models to meet your needs. When unpacking the control, make sure that you have not suffered any damage during shipping, damage to the control frame can cause the control to malfunction during the operation of the control and prime mover, and if damage occurs and is not repaired, it can result in widespread personal injury and potential death.

After the controls are unwrapped and damage assessed, installation can begin. The controller has nine potentiometers that need to be set up in order for the prime mover to work properly. Stable operation of the prime mover is essential to not cause injury, overheating, speeding and potential death. If your prime mover is running stable, then you can start adjusting the potentiometer to the rated speed so that the prime mover can start running at the optimal speed.

The reset and gain potentiometer on the controller also affect the speed of the prime mover, there are small and temporary changes in the speed of the prime mover when adjusting the gain, you can slowly turn the gain potentiometer to minimize possible changes.

If you overdrive while operating the prime mover during startup, the cause may be ramp adjustment, if it is ramp adjustment, you can increase the ramp time on the controller, which will reduce the acceleration.

9907-016 控制单元 有九个电位器 WOODWARD

【其他型号推荐】