9907-238 负载分配操作控制器 WOODWARD
【产品详情】
伍德沃德零件 9907-238 系列 2301A 负载分配和速度控制。可以使用电池或其他交流发电机操作,并且不得固定在发动机上。
9907-238 是一款双系统负载控制和负载分配操作控制器。它带有同步模式,可与许多其他功能兼容。这可用于以下移动速度:
单原动机操作
两个或多个原动机
针对无限总线的基本负载
这种选择对于正向或后向应用以及单执行器或串联执行器都是可取的。有三种不同的执行器变体,具有不同范围的高压型号。范围为 20-40 Vdc、88-132 V 交流以及 45-440 Hz。 您还可以选择添加额外的减速斜坡,当使用此斜坡时,当您开始斜坡额定为空闲时,会额外增加 <> 秒。当没有斜坡时,这种情况会立即发生。
从坡道到电源,要操作此机器,您可以使用电池,但它需要使用交流发电机或其他充电设备。此外,电压源介于 18-40 Vdc 或 90 -150 Vdc 之间。最后,安装本产品时,请务必将其安装在非常适合以下要求的区域:
可持续的通风来源
有足够的空间进行维修和日常维护
温度不超过 -40 - +70 摄氏度或 -40 - +158 华氏度之间的位置。
穆斯不能固定在发动机上。
9907-238 负载分配操作控制器 WOODWARD
【英文介绍】
Woodward Part 9907-238 Series 2301A Load distribution and speed control. It can be operated using a battery or other alternator and must not be fixed to the engine.
The 9907-238 is a dual system load control and load distribution operating controller. It comes with a sync mode and is compatible with many other features. This can be used for the following movement speeds:
Single prime mover operation
Two or more prime movers
Base load for unlimited buses
This option is desirable for forward or backward applications as well as single or series actuators. There are three different actuator variants with different ranges of high pressure models. The range is 20-40 Vdc, 88-132 V AC, and 45-440 Hz. You also have the option to add an additional deceleration ramp, which, when used, adds an extra <> second when you start the ramp rated as idle. When there is no ramp, this happens immediately.
From the ramp to the power supply, to operate this machine you can use a battery, but it requires the use of an alternator or other charging device. In addition, voltage sources are between 18-40 Vdc or 90-150 Vdc. Finally, when installing this product, be sure to install it in an area well suited to the following requirements:
Sustainable source of ventilation
Plenty of space for repairs and routine maintenance
The temperature does not exceed the position between -40 - +70 degrees Celsius or -40 - +158 degrees Fahrenheit.
Moose can't be attached to the engine.
9907-238 负载分配操作控制器 WOODWARD
【其他型号推荐】
TRICONEX 3636T | Triconex DCS | 模拟量输入端子板 | BENTLY 3500/90 | 智能面板 | Bently Nevada |
TRICONEX 3625C1 | Triconex DCS | 数字量输出卡件 | BENTLY 3500/77M | 高压变频器主板接口板 | Bently Nevada |
TRICONEX 9566-810 | Triconex DCS | 双数字输出模块 | BENTLY 3500/72M | 控制系统 | Bently Nevada |
TRICONEX 4000163-510 | Triconex DCS | 模拟量输入端子板 | BENTLY 3500/70M | 气体分析仪 | Bently Nevada |
TRICONEX 4000103-510 | Triconex DCS | 控制器 | BENTLY 3500/65-01-00 | 余压控制器 | Bently Nevada |
TRICONEX 4000094-110 | Triconex DCS | 模拟量输入端子板 | BENTLY 3500/65 | 电气交流接触器 | Bently Nevada |
TRICONEX 4000093-310 | Triconex DCS | 卡件 | BENTLY 3500/64M | 安全控制器 | Bently Nevada |
TRICONEX 4000098-516 | Triconex DCS | 转换器 | BENTLY 3500/64 | 控制操作面板 | Bently Nevada |
TRICONEX 4000094-316 | Triconex DCS | 传感器 | BENTLY 3500/63-01-00 | 互感器和传感器 | Bently Nevada |
TRICONEX 4000093-316 | Triconex DCS | 主控制板 | BENTLY 3500/62-03-00 | 信号接收板 | Bently Nevada |
TRICONEX 4000103-516 | Triconex DCS | 模拟量输入卡件 | BENTLY 3500/62 | 热继电器 | Bently Nevada |
TRICONEX 4000103-520 | Triconex DCS | 开关量输入模块 | BENTLY 3500/61C | 模拟输入板 | Bently Nevada |
TRICONEX 9853-610 | Triconex DCS | AO连接卡 | BENTLY 3500/61163179-02 | 整流模块 | Bently Nevada |
TRICONEX 9674-810 | Triconex DCS | 数字量输出端子板 | BENTLY 3500/61-03-00 | 输入模块 | Bently Nevada |
TRICONEX 9662-810 | Triconex DCS | 模拟量输入端子板 | BENTLY 3500/61-01-00 | 机器人驱动电源 | Bently Nevada |
TRICONEX 40113-02 | Triconex DCS | 传感器 | BENTLY 3500/61 | 机器人轴计算机板 | Bently Nevada |
4000636 F 267 | Triconex DCS | 卡件 | BENTLY 3500/60-01-00 | 机器人总线卡 | Bently Nevada |
7400195-210 | Triconex DCS | 逻辑控制模块 | BENTLY 3500/60 133811-01D | 机器人配件 串口测量板 | Bently Nevada |
TRICONEX 9513-XX | Triconex DCS | 卡件 | BENTLY 3500/60 | 机器人电源模块 | Bently Nevada |