9907-017 控制单元  由负载分配和速度控制组成

【产品详情】

伍德沃德部分 9907-017 系列 2301A 负载分配和速度控制。配备超速损失信号，相同的控制系统。

伍德沃德公司生产的控制单元 9907 该型号来自 2301A 系列，由负载分配和速度控制组成，通常该型号分为高压和低压型号，具有正向作用或反向作用。

为了区分高压和低压控制，高压控制将在控制前端指示，而低压控制没有这样的指示。当区分控制器上的两种类型的电压时，许多端子用于相同的功能。低压型号上的零端子不能使用，同时在高压型号上可以使用该端子，并向第十四、十七、十八、十九和三十端子证明 20 Vdc。

高压型号在 90-150 Vdc 或 88-132 V 交流的典型电源上运行;无论您使用的是低压还是高压型号，它都需要不低于 15 W 的标称功率才能准确运行。将电源连接到控制器时，请确保电源的引线正确连接，正确连接时，正极引线将连接到第十六个端子，负极引线将连接到第十五个端子。

9907-017 控制单元  由负载分配和速度控制组成

【英文介绍】

Woodward Part 9907-017 Series 2301A Load Distribution and speed control. Equipped with overspeed loss signals, same control system.

The Woodward Control unit 9907-017 can be purchased at AX Control or for any of your repair needs. This model is from the 2301A series and consists of load distribution and speed control, usually the model is divided into high and low pressure models, with a positive or reverse action.

To distinguish between high and low pressure controls, the high pressure control will be indicated on the front end of the control, while the low pressure control has no such indication. When distinguishing between the two types of voltages on the controller, many terminals are used for the same function. The zero terminal on the low voltage model cannot be used, while the terminal can be used on the high voltage model and prove 20 Vdc to the 14, 17, 18, 19, and 30 terminals.

High-voltage models operate on a typical power supply of 90-150 Vdc or 88-132 V AC; Whether you are using a low or high voltage model, it needs a nominal power of no less than 15 W to operate accurately. When connecting the power supply to the controller, make sure that the power supply leads are connected correctly, when connected correctly, the positive lead will be connected to the 16th terminal and the negative lead will be connected to the 15th terminal.

9907-017 控制单元  由负载分配和速度控制组成

【其他型号推荐】