9905-131 WOODWARD 与 SPM 同步器兼容

【产品详情】

伍德沃德零件 9905-131 系列 2301A 负载分配和速度控制。型号与 SPM 同步器兼容，温度范围为 –40 至 +185 °F。

 Woodward Inc 在其 9905A 负载共享和速度控制模型中制造的 131-2301 控制器是一种正向作用的单独执行器，是一种执行器电流为 0-200 mA 的低压模型。在安装 9905-131 控制器之前，评估控制器的安装位置，这是控制装置正常运行的关键，控制装置应放置在直接接触水有限或暴露于冷凝可能性有限的地方，以及为控制装置冷却提供适当通风的重要空间。

在使用您的控制时，如果您有速度和相位匹配同步器（这是一个可选设备，不使用本产品绝不会影响控制的功能）将同步器连接到正极二十五端子和负二十六端子，一旦同步器已经连接到它们正确的端子，将屏蔽线连接到端子二十七。

由于屏蔽线与此控制一起使用，因此需要制作便利，以便接线可以正确连接到控制器。屏蔽线必须尽可能短地暴露在屏蔽层之外，但当涉及到屏蔽的另一端时，它们必须自由、绝缘并与任何其他导体开放。评估屏蔽布线时，请确保电缆是一对双绞线。屏蔽布线的重要性在于防止控制器从附近设备拾取附带信号。

9905-131 WOODWARD 与 SPM 同步器兼容

【英文介绍】

Woodward Part 9905-131 Series 2301A Load distribution and speed control. Models are compatible with SPM synchronizers and have a temperature range of -40 to +185 °F.

The 131-2301 controller manufactured by Woodward Inc in its 9905A load sharing and Speed control model is a forward-acting individual actuator, a low-voltage model with an actuator current of 0-200 mA. Before installing the 99005-131 controller, assess the installation location of the controller, which is key to the proper operation of the control unit, the control unit should be placed in an area with limited direct contact with water or limited possibility of exposure to condensation, and an important space to provide proper ventilation for the cooling of the control unit.

When using your control, if you have a speed and phase matching synchronizer (this is an optional device, and not using this product will never affect the function of the control) connect the synchronizer to the positive twenty-five terminals and the negative twenty-six terminals, and once the synchronizer has been connected to their correct terminals, connect the shielding wire to the terminal twenty-seven.

Since the shielded wire is used with this control, it needs to be made convenient so that the wire can be properly connected to the controller. The shielded wires must be exposed outside the shield for as short a time as possible, but when it comes to the other end of the shield, they must be free, insulated, and open to any other conductor. When evaluating shielded wiring, make sure the cable is a twisted pair. The importance of shielded wiring is to prevent the controller from picking up incidental signals from nearby devices.

9905-131 WOODWARD 与 SPM 同步器兼容

【其他型号推荐】