9905-034 监控动力单元 WOODWARD

【产品详情】

伍德沃德INC 2301A负载分配和速度控制系列具有多种型号。9905-034型号就是其中之一，该特定型号是执行器电流为0-200的高压正向作用型号，该型号是双执行器型号。在使用 9905-034 单元时，如果在模型和原动机运行期间未正确监控动力单元的速度，则两者无法充分响应任何负载变化，由于这种可能性，可以预期原动机和控制将出现稳定性问题，并且两者将无法正常工作。

控制可以并联，主要用于下垂模式和同步模式，如果您希望选择负载分配控制的同步操作，请将发电机并联断路器的辅助触点从零端子（此端子的使用严格用于高压型号，在操作低压模型时不应使用）连接到端子十四。如果您出于任何原因希望调整并联，可以通过顺时针缓慢转动两者来调节下降和负载增益电位器。

在与原动机一起操作控制时，如果原动机拒绝与其他单元分担负载，原因可能是速度设置关闭或不相等，如果它们不相等，则通过将所有单元的速度设置设置为相同来补救这种情况，确保它们彼此无法区分。

9905-034 监控动力单元 WOODWARD

【英文介绍】

The Woodward INC 2301A Load Distribution and Speed Control family is available in a variety of models,Model 9905-034 is one of them, this particular model is a high voltage forward acting model with an actuator current of 0-200, this model is a dual actuator type number. When using the unit 9905-034, if the speed of the power unit is not properly monitored during the operation of the model and the prime mover, then both cannot adequately respond to any load changes, due to this possibility, it can be expected that the prime mover and the control will have stability problems and both will not work properly.

The control can be parallel, mainly for droop mode and synchronous mode, if you wish to choose synchronous operation of load distribution control, please connect the auxiliary contact of the generator parallel circuit breaker from the zero terminal (the use of this terminal is strictly for high voltage models and should not be used when operating low voltage models) to the terminal 14. If you wish to adjust the shunt for any reason, you can adjust the drop and load gain potentiometers by turning both slowly clockwise.

When operating the control with the prime mover, if the prime mover refuses to share the load with the other units, the cause may be that the speed Settings are off or not equal, if they are not equal, remedy the situation by setting the speed Settings of all units to the same, ensuring that they are indistinguishable from each other.

9905-034 监控动力单元 WOODWARD

【其他型号推荐】