9905-033 用于同步或下垂模式
【产品详情】
伍德沃德零件 9905-033 系列 2301A 负载分配和速度控制。可用于同步或下垂模式,一种反向作用模型。
伍德沃德 9905A 系列的 033-2301 型是高压反向作用型号,具有 0-400 执行器电流和单个执行器。此控制不提供减速斜坡。如果将一系列控制器连接到单个执行器控制器不会削弱 9905-033 型号附带的任何其他功能。如果决定使用温度限制伍德沃德设备,则可以将其与负载分配和速度控制一起使用,或者仅与速度控制模型一起使用。
使用控制时,如果断路器辅助触点和下垂触点均闭合,则控制处于同步模式,当控制使用同步系统时,负载共享线继电器激活,并且在系统控制中停用下垂。
使用控制时,如果在原动机最初启动时出现烟雾的错误,请检查以确保启动燃料限制已激活,如果在原动机和控制被触发之前尚未激活,请绕过燃料限制,然后在启动原动机的发动机之前打开控制器。
9905-033 用于同步或下垂模式
【英文介绍】
Woodward Part 9905-033 Series 2301A Load Distribution and speed control. Can be used in sync or sag mode, a reverse action model.
Model 033-2301 of the Woodward 9905A series is a high voltage reverse acting model with 0-400 actuator current and a single actuator. This control does not provide deceleration ramp. Connecting a series of controllers to a single actuator controller does not diminish any of the other features that come with the 9905-033 model. If you decide to use a temperature-limited Woodward device, you can use it with load distribution and speed control, or just with the speed control model.
When using the control, if the circuit breaker auxiliary contact and droop contact are closed, the control is in synchronous mode, and when the control uses the synchronous system, the load sharing line relay is activated, and the droop is deactivated in the system control.
When using the controls, if the error of smoke occurs when the prime mover is initially started, check to make sure the starting fuel limit is activated, if it is not activated before the prime mover and control are triggered, bypass the fuel limit and then turn on the controller before starting the engine of the prime mover.
9905-033 用于同步或下垂模式
【其他型号推荐】
PR6426/010-120 | EPRO | 前置器及传感器 | BENTLY 3309010050100200 | 压敏电阻板 | Bently Nevada |
PR6426/010-110 | EPRO | 前置器及传感器 | BENTLY 3309010018100200 | 检测模块 | Bently Nevada |
PR6426/010-100 | EPRO | 前置器及传感器 | BENTLY 330900-50-05 | 伺服定位系统 | Bently Nevada |
PR6426/010-040 | EPRO | 前置器及传感器 | BENTLY 330900-50-00 | TR控制板 | Bently Nevada |
PR6426/010-030 | EPRO | 前置器及传感器 | BENTLY 3308812808098060 | SOE主模件 | Bently Nevada |
PR6426/010-020 | EPRO | 前置器及传感器 | BENTLY 3308812800165070 | 环路数据处理模件 | Bently Nevada |
PR6426/010-010 | EPRO | 前置器及传感器 | BENTLY 330878-90-00 | 计算机接口模件 | Bently Nevada |
PR6426/010-000 | EPRO | 前置器及传感器 | BENTLY 330877803700 | DCS板 | Bently Nevada |
PR6426/000-141 | EPRO | 前置器及传感器 | BENTLY 33087601100100 | 可编程控制系统 | Bently Nevada |
PR6426/000-140 | EPRO | 前置器及传感器 | BENTLY 330854-080-24-05 | ABBIGBT模块 | Bently Nevada |
PR6426/000-130 | EPRO | 前置器及传感器 | BENTLY 3308510500271000 | 模件总线电缆适配器接口 | Bently Nevada |
PR6426/000-121 | EPRO | 前置器及传感器 | BENTLY 330851-04-000-023-10-01-05 | 模件总线连接电缆 | Bently Nevada |
PR6426/000-111 | EPRO | 前置器及传感器 | BENTLY 330851-02-000-070-50-00-05 | 诊断电缆 | Bently Nevada |
PR6426/000-101 | EPRO | 前置器及传感器 | BENTLY 330850-90-05 | 按键屏 | Bently Nevada |
PR6426/000-100 | EPRO | 前置器及传感器 | BENTLY 330850-90-00 | 红外通讯 | Bently Nevada |
PR6426/000-041 | EPRO | 前置器及传感器 | BENTLY 330850-51-05 | S型热电偶 | Bently Nevada |
PR6426/000-031 | EPRO | 前置器及传感器 | BENTLY 330850-50-CN | 端口号 | Bently Nevada |
PR6426/000-030 | EPRO | 前置器及传感器 | BENTLY 33080-51-00 | 模拟输入输出 | Bently Nevada |
PR6426/000-021 | EPRO | 前置器及传感器 | BENTLY 3308012806095030 | 缓冲板 | Bently Nevada |