9905-032 执行器电流 控制装置 WOODWARD

【产品详情】

伍德沃德零件 9905-032 系列 2301A 负载分配和速度控制。在 0-400 执行器电流下运行，可与蒸汽或燃气轮机一起使用。

伍德沃德 INC 2301A 系列，其中一个控制装置是 9905-032 型号，该特定型号是另一种高压型号，执行器电流为 0-400，它是单独的执行器型号，并且是正向作用的。 该装置容易发生静电活动，因此在操作控制器时，明智的做法是避免使用其他产生静电活动的材料，例如衣服，在操作时穿由棉或棉混纺材料制成的衣服是有见地的。

在考虑此控件的位置时，明智的做法是避开振动水平高的区域;要考虑的另一件事是操作的温度范围，范围应在负四十摄氏度到正七十摄氏度的某个地方。

要正确操作控制，加速斜坡（空闲或额定）为 0 到 10 秒，必须激活开关，并确保端子 16 到 19 已关闭。转动电位计时，请确保不要意外地使其扭矩过大。

9905-032 执行器电流 控制装置 WOODWARD

【英文介绍】

Woodward Part 9905-032 Series 2301A Load Distribution and speed control. Operates under 0-400 actuator current and can be used with steam or gas turbines.

Woodward INC 2301A series, one of the controls is Model 9905-032, this particular model is another high voltage model, the actuator current is 0-400, it is a separate actuator type number, and is positive acting. The device is prone to electrostatic activity, so when operating the controller, it is wise to avoid using other materials that generate electrostatic activity, such as clothing, and it is wise to wear clothing made of cotton or cotton blend materials when operating.

When considering the location of this control, it is wise to avoid areas with high vibration levels; Another thing to consider is the temperature range of the operation, which should range somewhere from minus 40 degrees Celsius to plus 70 degrees Celsius.

To operate the control correctly, the acceleration ramp (idle or rated) is 0 to 10 seconds, the switch must be activated and terminals 16 to 19 must be closed. Turn the potentiometer, make sure you don't accidentally overtorque it.

9905-032 执行器电流 控制装置 WOODWARD

【其他型号推荐】