9905-030 控制单元  WOODWARD 检查辅助断路器

【产品详情】

伍德沃德零件 9905-030 系列 2301A 负载分配和速度控制。高压，88-132 Vac 或 90-150 VDC 电源。

Woodward INC 9905-030 控制单元高压 88-132 V 交流或 90-150 Vdc 型号。它是带有单个执行器模型的前向作用;这种高压型号不提供减速斜坡，工作在0-200 mA执行器电流。使用此模型时，直接在控件的正面注明控件是否为高压模型。 

当使用原动机操作此高压型号时，必须注意，在任何情况下，您都不应在原动机运行时断开连接到端子 4 到 9 的任何电线。 操作原动机时可能发生的另一个问题是，如果发生这种情况，它无法与其他单元共享负载，请检查辅助断路器并测量从端子 14 到端子 18 的控制。

9905-030 控制单元  WOODWARD 检查辅助断路器

【英文介绍】

Woodward Part 9905-030 Series 2301A Load Distribution and speed control. High voltage, 88-132 Vac or 90-150 VDC power supply.

Woodward INC 9905-030 Sales, repair and refurbishment services for high voltage 88-132 V AC or 90-150 Vdc models of control units. It is a forward action with a single actuator model; This high voltage model does not provide deceleration ramp and operates at 0-200 mA actuator current. When using this model, indicate whether the control is a high-pressure model directly on the front of the control.

When operating this high voltage model with the prime mover, it must be noted that under no circumstances should you disconnect any wires connected to terminals 4 to 9 while the prime mover is running. Another problem that can occur when operating the prime mover is that if this happens and it cannot share the load with the other units, check the auxiliary circuit breaker and measure the control from terminal 14 to terminal 18.

9905-030 控制单元  WOODWARD 检查辅助断路器

【其他型号推荐】