9905-882 超速保护系统 断电跳闸系统
【产品详情】
使用伍德沃德的ProTech 203超速保护系统减少系统停机时间 。这些系统持续监控原动机速度,以便在检测到超速情况时激活跳闸继电器 。此版本型号为 9905-882,是一种断电跳闸系统。该 ProTech 203 系统的模块化设计既确保了高水平的精度(0 °C 时为 1.25%),又允许在其他系统可能需要完全系统停止时正常运行。
9905-882 型使用磁性拾音器 (MPU) 来监控原动机速度。速度计算由三个独立的速度传感单元执行,这些单元以三分之二的投票配置连接。组成 9905-882 的这三个单元除了电源外是相同的,如下所示:
机组 A:24 V 直流
单元 B:24 V 直流
C单元:220 Vac
ProTech 203 型号 9905-882 即使其中一个速度感应单元离线,也能正常工作。这意味着可以一次测试一个单元,也可以在原动机脱机的情况下更换一个单元。如果其中一个单元跳闸,另外两个单元将继续提供准确的输出。速度感应单元将保持跳闸状态,直到电源循环或复位,并且每个单元都必须在涡轮机启动之前复位。
ProTech 203 超速保护系统手册 85191 包含有关型号 9905-882 的更多规格和信息,包括选择安装位置时应考虑的因素。ProTech 203 型号 9905-882 的外壳必须使用可选的不锈钢轮毂才能获得 NEMA 4X 认证。
9905-882 超速保护系统 断电跳闸系统
【英文介绍】
Reduce system downtime with Woodward's ProTech 203 overspeed protection system. These systems continuously monitor the prime mover speed in order to activate the trip relay when overspeed conditions are detected. This version, model 9905-882, is a power-off trip system. The modular design of the ProTech 203 system both ensures a high level of accuracy (1.25% at 0 °C) and allows normal operation when other systems may require a complete system stop.
The Model 9905-882 uses a magnetic pickup (MPU) to monitor the prime mover speed. The speed calculation is performed by three independent speed sensing units connected in a two-thirds voting configuration. The three units that make up the 9905-882 are identical except for the power supply, as follows:
Unit A: 24 V DC
Cell B: 24 V DC
C Unit: 220 Vac
ProTech 203 Model 9905-882 works even if one of the speed sensing units is offline. This means that one unit can be tested at a time, and one unit can also be replaced if the prime mover is offline. If one of the units trips, the other two units will continue to provide accurate output. The speed sensing units will remain in the trip state until the power supply is cycled or reset, and each unit must be reset before the turbine can be started.
The ProTech 203 Overspeed Protection System Manual 85191 contains more specifications and information about model 9905-882, including factors to consider when choosing a mounting location. The housing of ProTech 203 model 9905-882 must use optional stainless steel wheels to be NEMA 4X certified.
9905-882 超速保护系统 断电跳闸系统
【其他型号推荐】
TRICONEX DI6503 | Triconex DCS | DCS卡件 | BENTLY 3500/50M | 备件板 | Bently Nevada |
TRICONEX DO2401 | Triconex DCS | 数字输出模块 | BENTLY 3500/50133388-02 | 机器人板卡 | Bently Nevada |
TRICONEX AI2351 | Triconex DCS | 模拟量输入模块 | BENTLY 3500/50-04-00 | 直流调速器IO板 | Bently Nevada |
TRICONEX ICM6211 | Triconex DCS | 卡件 | BENTLY 3500/50-01-0101 | 总线适配器 | Bently Nevada |
TRICONEX 9771-210 | Triconex DCS | 模拟量输入端子板 | BENTLY 3500/50-01-01-00-00 | 光纤通讯适配器模块 | Bently Nevada |
TRICONEX 9765-210 | Triconex DCS | PLC 模块 | BENTLY 3500/50-01-00-02 | I/O板 | Bently Nevada |
TRICONEX 9761-210 | Triconex DCS | 模拟量输入端子板 | BENTLY 3500/50-01-00-02 | 备件 | Bently Nevada |
TRICONEX 9668-110 | Triconex DCS | 卡件 | BENTLY 3500/50-01-00-01 | 数字信号输出模块 | Bently Nevada |
TRICONEX 9662-610 | Triconex DCS | 数字量输出端子板 | BENTLY 3500/50-01-00-00 | 伺服控制系统 | Bently Nevada |