8237-1597 超速设备 高低压电源输入

【产品详情】

ProTech-GII的隔板安装式8237-1597设计用作任何尺寸的蒸汽，燃气，水轮机，往复式发动机或工厂工艺设备的超速设备。

产品 8237-1597 可以配备任何尺寸的涡轮机，并在发生不安全加速时安全关闭它。隔板支架可与蒸汽、燃气和水力涡轮机配合使用，并具有三个独立的继电器。它还使用三分之二的投票架构，以及高低压电源输入。

有关型号 8237-1597 的其他细节包括：

它是Protech-GII系列的一部分。

速度读数为 4 至 20 mA。

MPU 和加速度检测。

采用保形涂层，可抵抗硫污染。

可用于 3C2 类环境。

易于集成到任何尺寸的涡轮机中。

8237-1597 型配置了在线维修选项，可以在整个系统仍在运行时在一个模块上工作。背板结构也使其易于在此设备上工作。该伍德沃德安全装置还可以执行例行检查，以确保每个模块正常运行。这是通过内部发生器和频率完成的，并且可以存储这些测试的结果。

8237-1597 超速设备 高低压电源输入

【英文介绍】

ProTech-GII's bulkhead mounted 8237-1597 is designed to be used as an overspeed device for steam, gas, water turbines, reciprocating engines or plant process equipment of any size.

Product 8237-1597 can be equipped with a turbine of any size and safely shut it down in the event of unsafe acceleration. The partition bracket can be used with steam, gas and hydraulic turbines and has three independent relays. It also uses a two-thirds voting architecture, as well as high and low voltage power inputs.

Additional details about Model 8237-1597 include:

It is part of the Protech-GII series.

Speed readings are 4 to 20 mA.

MPU and acceleration detection.

With conformal coating, it can resist sulfur pollution.

It can be used in 3C2 environment.

Easy to integrate into any size turbine.

The model 8237-1597 is configured with an online maintenance option to work on one module while the entire system is still running. The backplane structure also makes it easy to work on this device. The Woodward safety device can also perform routine checks to ensure that each module is functioning properly. This is done with internal generators and frequencies, and the results of these tests can be stored.

8237-1597 超速设备 高低压电源输入

【其他型号推荐】