8440-1845 控制器单元 负载转移

【产品详情】

部件编号8440-1845是由伍德沃德公司设计的用于发电机组或发电机组应用的EasyGen 3000系列。8440-1845型号可用于广泛的应用程序，例如热电联产/分布式发电，AMF，调峰和进出口仅举几例。该部分还具有各种不同的功能，其中一个功能是负载转移，负载转移功能用于交换，软加载/卸载，主电源并行和开/闭转换应用。

您应该注意，该控制单元的备用部件号是easYgen-3100-5-P2。easYgen-3200-5型号是塑料的，有一个LCD屏幕，可以显示控制器上发生的所有报警、操作等。在你的控制器上的固有功耗需要是19瓦的最大值，任何高于这将表明一个潜在的错误，你的控制器将不能按需要工作。请确保在您安装控制器时，它将进入正确的位置，该控制器需要安装在机柜中，而不是安装在您连接控制器的设备的前面板上。你的模型的正弦扫描振动频率范围应该在5赫兹到100赫兹之间。

8440-1845 控制器单元 负载转移

【英文介绍】

Part number 8440-1845 is the EasyGen 3000 series designed by Woodward for use in generator sets or generator set applications. Models 8440-1845 can be used in a wide range of applications such as cogeneration/distributed generation, AMF, peak loading and import/export to name a few. This section also has a variety of different functions, one of which is load Transfer, the load transfer function is used for switching, soft load/unload, main power parallel and on/off conversion applications.

You should note that the spare part number for this control unit is easYgen-3100-5-P2. The easYgen-3200-5 model is plastic and has an LCD screen that shows all alarms, operations, etc. that occur on the controller. The inherent power consumption on your controller needs to be a maximum of 19 watts, anything higher than this will indicate a potential error and your controller will not work as needed. Make sure it will go into the correct position when you install the controller, which needs to be installed in the cabinet and not on the front panel of the device you connect the controller to. The sinusoidal vibration frequency range of your model should be between 5 Hz and 100 Hz.

8440-1845 控制器单元 负载转移

【其他型号推荐】