8440-1842 系列控制器单元 该单元配备了大量的工具和功能

【产品详情】

零件号8440-1842来自伍德沃德公司的EasyGen 3000系列，这个特定的模型也被标记为EasyGen -3200-1- p2模型。easYgen-3200-1-P2型号配备了LCD屏幕，允许用户直接访问控制器的状态信息和潜在配置。当您使用电线连接您的控制器时，您可以使用几种不同的AWG线和不同的尺寸范围，请确保您使用正确的AWG线，以确保您的控制器正常运行，并且在控制器和发电机/发动机运行期间不会发生故障。

您的8440-1842控制器带有一系列不同的功能，您的控制器的功能之一是设备上的从或主功能。您的控制器还配备了矢量组，可以调整以优化同步。型号8440-1842配备了自检测试，自检测试通常保持电源电压和处理器功能运行在控制下，以确保您的控制执行在其峰值。

控制器的电源是12/24伏直流电，当你连接电源时有三个端子，端子61连接保护地，只能用在塑料单元上。终端63是连接主电源的地方，终端64也应该连接，但通常不应该接收电源。

8440-1842 系列控制器单元 该单元配备了大量的工具和功能

【英文介绍】

Part number 8440-1842 comes from Woodward's EasyGen 3000 series, and this particular model is also labeled the EasyGEN-3200-1-P2 model. The easYgen-3200-1-P2 model is equipped with an LCD screen that allows the user to directly access the controller's status information and potential configurations. When you use wires to connect your controller, you can use several different AWG wires and different size ranges, make sure you use the right AWG wire to ensure that your controller is functioning properly and that no failure occurs during controller and generator/engine operation.

Your 8440-1842 controller comes with a range of different functions, one of the functions of your controller is the slave or master function on the device. Your controller is also equipped with vector groups that can be adjusted to optimize synchronization. Models 8440-1842 are equipped with a self-check test, which typically keeps the power supply voltage and processor functions running under control to ensure your control is performing at its peak.

The power supply for the controller is 12/24 volts DC, when you connect the power supply there are three terminals, terminal 61 connected to the protective ground, can only be used on plastic units. Terminal 63 is where the main power supply is connected, and terminal 64 should also be connected, but generally should not receive power.

8440-1842 系列控制器单元 该单元配备了大量的工具和功能

【其他型号推荐】