8440-1816 该型号具有四种不同的应用模式

【产品详情】

型号8440-1816来自EasyGen 3000系列，该部件由Woodward inc .制造，。该型号具有四种不同的应用模式，分别标记为启动/停止模式，打开GCB，打开/关闭GCB和打开/关闭GCB/MCB。每种模式的操作方式不同，尽管每种模式都有一些相似的功能。例如，打开/关闭GCB应用程序将启动和停止连接到控制器的发动机，控制器上的所有模式都可以测量已连接到控制器的发动机或发电机的参数。

在您的控制器运行之前，您可以将其设置为无负载或带负载。如果您决定测试您的控制器无负载，请确保您的控制器的操作模式设置为自动。要进行无负载测试，您的控制器将执行自动停止段，并且通常在自动模式下保持待机状态。

您的控制器配备了一个导入/导出选项，允许将其用作交换点。您的控制器也非常通用，可以适应您需要适应的控制器上的任何应用程序。

8440-1816 该型号具有四种不同的应用模式

【英文介绍】

Model 8440-1816 is from the EasyGen 3000 series and this part is manufactured by Woodward inc. Make... The model has four different application modes, labeled Start/Stop mode, GCB on, GCB on/Off, and GCB/MCB on/off. Each mode operates differently, although each mode has some similar functionality. For example, opening/closing the GCB application will start and stop the engine connected to the controller, and all modes on the controller can measure the parameters of the engine or generator already connected to the controller.

Before your controller runs, you can set it to no load or with load. If you decide to test your controller without load, make sure your controller's operating mode is set to automatic. To perform a no-load test, your controller will perform an automatic stop segment and usually remain in standby mode in automatic mode.

Your controller is equipped with an import/export option that allows it to be used as an exchange point. Your controller is also very versatile and can be adapted to any application on the controller you need to adapt.

8440-1816 该型号具有四种不同的应用模式

【其他型号推荐】