8440-1810 该型号有两个不同的电压输入

【产品详情】

8440-1810型由伍德沃德公司制造，属于EasyGen 1000系列。该型号有两个不同的电压输入，如果电压在50-130 V之间，那么输入必须是100 V输入，如果电压在131-480 V之间，那么输入必须是400 V输入。

如果一个充电交流发电机在12v电压下工作，那么交流发电机的限流电阻需要为105-120欧姆或6瓦，如果应用是24 V，那么电阻需要在210-240欧姆的范围内，这也需要为6瓦。

该模型可以连接到GSM调制解调器，也可以连接到笔记本电脑，请注意，如果正在使用SIM卡并启用了发送短信功能，则可以通过GSM调制解调器发送短信。该控件还可以连接到固定网络调制解调器，通常也称为固定电话调制解调器，如果使用固定电话调制解调器，则特别推荐使用Phoenix型号。凤凰调制解调器确实有一个可用于发送警报信息的离散输入。

当使用控制时，最好是模型处于空闲模式，它将阻止任何被标记为欠压，低频率和低速度的警报，一旦LM为假，警报将能够再次被监控。

8440-1810 该型号有两个不同的电压输入

【英文介绍】

The Model 8440-1810 was built by Woodward and belongs to the EasyGen 1000 series. This model has two different voltage inputs, if the voltage is between 50-130 V, then the input must be 100 V input, if the voltage is between 131-480 V, then the input must be 400 V input.

If a charging alternator is operating at 12v voltage, then the current limiting resistance of the alternator needs to be 105-120 ohms or 6 watts, and if the application is 24 V, then the resistance needs to be in the range of 210-240 ohms, which also needs to be 6 watts.

The model can be connected to a GSM modem or to a laptop, note that SMS messages can be sent via GSM modem if a SIM card is being used and SMS sending is enabled. The control can also be connected to a fixed network modem, also commonly referred to as a landline telephone modem, and the Phoenix model is especially recommended if a landline telephone modem is used. The Phoenix modem does have a discrete input that can be used to send alarm information.

When using the control, it is best if the model is in idle mode, it will block any alarms that are marked as undervoltage, low frequency and low speed, and once the LM is false, the alarms will be able to be monitored again.

8440-1810 该型号有两个不同的电压输入

【其他型号推荐】