8440-1809 EasyGen 1000系列发电机组控制器

【产品详情】

由Woodward INC制造的EasyGen 1000系列型号8440-1809，当您使用控件时，控件上的报警类如下;A类、B类、C类、D类、E类和F类警报仍然是A类警报，B类警报仍然是B类警报，C、D、E和F类警报都将成为B类警报。

您的控制可以设置有负载或无负载。为了测试你的控制与负载，它将在自动模式下启动，一个特殊的消息将不会出现在显示屏上，如果电源故障，而你正在启动你的控制装置将继续运行，直到电源重新打开和电源的稳定时间到期。

在操作过程中，确保控制台上的GCB关闭命令不超过100毫秒。另外，请注意，在某些应用程序中，需要来自两个独立继电器的CB关闭命令。如果你开始你的控制，LM是活跃的，GCB将保持打开，这将导致控制的故障，确保当你开始你的控制，这不会发生。

8440-1809 EasyGen 1000系列发电机组控制器

【英文介绍】

Your control is offered to be set up with or without load. To test your control with the load it will start in automatic mode, and a special message will not appear on the display screen, if the mains fails while you are starting your control the unit will keep running until the mains turn back on and the settling time of the mains expire. 

During operation make sure that the GCB close command on your control is no longer than 100 ms. Also, note that with some applications that a CB close command that comes from two independent relays is required. If you start your control and the LM is active and the GCB will stay open which will cause a malfunction of the control, make sure that when you start your control that this cannot happen. 

If you are interested in purchasing this control you can contact our sales department by phone or by email to inquire about the availability of this control model.

8440-1809 EasyGen 1000系列发电机组控制器

【其他型号推荐】