8440-1801 伍德沃德EasyGen 300发电机组控制器模型

【产品详情】

该8440-1801伍德沃德公司EasyGen 300发电机组控制器模型。这种特定的模型也被称为EasyGen-350-X模型，当涉及到电压测量和电源时，它可以用于三相三线制，单相三线制和单相双线制版本。控制器上的状态LED指示控制的操作阶段，控制上的LED 17将指示发电机组控制器已停止，如果LED 12刚刚亮且不闪烁，则表明发电机已打开并正常运行。

该控制有许多不同的技术规格，其中之一是控制内的最大功耗，通常在小于0.15 W的范围内。该设备的另一项技术规范是，如果您使用主频测量频率，则该主频的Hz应在40.0至85.0的范围内。控制上的正弦振动应该是4 G或5到10 Hz。

当电池连接到控制器时，电池电压应在6.5- 32v范围内，电池电压的精度应达到1%。如果你看一下控制组的尺寸尺寸是158毫米乘158毫米乘40毫米。

8440-1801 伍德沃德EasyGen 300发电机组控制器模型

【英文介绍】

The 8440-1801 Woodward EasyGen 300 generator set controller model. This particular model is also known as the EasyGen-350-X model, and when it comes to voltage measurement and power supply, it can be used in three-phase three-wire, single-phase three-wire, and single-phase two-wire versions. The status LED on the controller indicates the operation phase of the control, the LED 17 on the control will indicate that the generator set controller has stopped, and if the LED 12 is just bright and does not blink, the generator is on and operating normally.

The control has many different technical specifications, one of which is the maximum power consumption within the control, usually in the range of less than 0.15W. Another technical specification for this device is that if you use a master frequency to measure the frequency, the Hz of that master frequency should be in the range of 40.0 to 85.0. The sinusoidal vibration on the control should be 4 G or 5 to 10 Hz.

When the battery is connected to the controller, the battery voltage should be in the range of 6.5-32v, and the accuracy of the battery voltage should reach 1%. If you look at the size of the control group the dimensions are 158 mm by 158 mm by 40 mm.

8440-1801 伍德沃德EasyGen 300发电机组控制器模型

【其他型号推荐】