8440-1799  EasyGen 300系列发电机组控制器

【产品详情】

控制部分8440-1799是来自伍德沃德EasyGen 300系列。手柄装在Woodward简易背包中，大小为158乘158，重量约为450克。在控制上的冲击应该在峰值读数为40g，并且应该只持续11毫秒。用于控制的接口被标记为RS232接口。控制有手动、停止和自动三种操作模式。在操作控制装置时，非常重要的是要注意控制装置上的停止模式与紧急停止功能不同。

在你的控制面板上提供了几个报警类，它们是B类和F类，但是A、C、D和E类可以配置到你的控制面板上，如果你在控制面板上配置了A、C、D和E类，它们每个都有不同的用途。D类报警器在屏幕上有一个可见的显示，它有一个关闭GCB的继电器，并将控制GCB断电，如果发生D类报警器也会发出警报和喇叭。

该控制器的测量电压为40 Vac，最大测量电压为346/00 Vac，控制器上的发电机频率应为15.0至85.0 Hz。

8440-1799  EasyGen 300系列发电机组控制器

【英文介绍】

The control part 8440-1799 is provided from the Woodward EasyGen 300 Series AX control. The handle is contained in the Woodward Simple backpack, which measures 158 by 158 and weighs about 450 grams. The shock on the control should read 40g at the peak and should last only 11 milliseconds. The interface used for control is labeled an RS232 interface. The control has three operating modes: manual, stop and automatic. When operating the control device, it is very important to note that the stop mode on the control device is different from the emergency stop function.

There are several alarm classes provided on your control panel, they are Class B and Class F, but classes A, C, D, and E can be configured on your control panel, if you configure classes A, C, D, and E on your control panel, they each have a different purpose. Class D alarms have a visible display on the screen, it has a relay that turns off the GCB and will control the GCB power failure, if it occurs Class D alarms will also sound an alarm and horn.

The measured voltage of the controller is 40 Vac, the maximum measured voltage is 346/00 Vac, and the generator frequency on the controller should be 15.0 to 85.0 Hz.

8440-1799  EasyGen 300系列发电机组控制器

【其他型号推荐】