8440-1798 发电机组控制 EasyGen 300 Woodward

【产品详情】

控制部件8440-1798由Woodward INC制造，属于EasyGen 300系列。8440-1798型号要求初始启动时的最小电源电压为10.5 Vdc，一旦控制启动，该型号可以在6.5至32 Vdc之间的连续电压上运行。

当操作8440-1789模型时，您可以使用控制上的led来指示控制是如何操作的。有9个LED将指示运行状态，当12个LED闪烁时，表明发电机电压/频率不在断路器的闭合范围内运行。如果13号LED闪烁，则表示发动机正在运行，但发动机监视器上的延迟时间尚未到期。

控制也有符号，可以指示控制中的错误，如果操作你的控制和电池出现，它表明电池正在执行欠压。控制也有报警信息，可以弹出在你的控制面板上，如果一个F级警报已经表明，这意味着控制将进入关闭状态。

8440-1798 发电机组控制 EasyGen 300 Woodward

【英文介绍】

The control unit 8440-1798 is manufactured by Woodward INC and belongs to the EasyGen 300 series. Models 8440-1798 require a minimum supply voltage of 10.5 Vdc at initial startup, and once the control is started, the model can operate at a continuous voltage between 6.5 and 32 Vdc.

When operating the 8440-1789 model, you can use the led on the control to indicate how the control is operating. There are 9 leds that will indicate the operating status, and when 12 leds flash, it indicates that the generator voltage/frequency is not operating within the closed range of the circuit breaker. If the number 13 LED blinks, the engine is running, but the delay time on the engine monitor has not yet expired.

The control also has symbols that can indicate an error in the control, if operating your control and the battery appears, it indicates that the battery is performing undervoltage. The control also has alarm messages that can pop up on your control panel, and if an F-level alert has been indicated, it means the control will go into the off state.

8440-1798 发电机组控制 EasyGen 300 Woodward

【其他型号推荐】