8440-2058 该控制的功率部分是一个电阻电路

【产品详情】

EasyGen 2000系列型号8440-2058。这种型号在使用汽油和柴油发动机时表现特别好。

发电机可能导致频率过高，发电机频率过高时可能发生的参数之一是报警类别，可以分配报警类别的每个限制，这将指定当超过限制时应采取的行动。发电机也可以引起频率下，这个频率下的一个参数是，当监控关闭时，这意味着控制将完全被禁用，根本不会监控。

该控制的功率部分是一个电阻电路，电流波形和电压通常导致功率因数为1.00。如果使用容性电路，波形将导致实际功率和无功功率的电压形式。

磁性的特性包括但不限于控制信号、负载类型和机组上的无功功率显示。当处理感应微处理器和无功功率显示时，它将是一个正70千伏和一个负50千伏。

8440-2058 该控制的功率部分是一个电阻电路

【英文介绍】

EasyGen 2000 series models 8440-2058. This model performs particularly well with gasoline and diesel engines.

One of the parameters that can occur when the generator frequency is too high is the alarm category, each limit of the alarm category can be assigned, which will indicate the action to be taken when the limit is exceeded. The generator can also cause frequency down, and one parameter under this frequency is that when the monitoring is off, this means that the control will be completely disabled and will not be monitored at all.

The power part of this control is a resistance circuit, and the current waveform and voltage usually result in a power factor of 1.00. If a capacitive circuit is used, the waveform will result in a voltage form of actual power and reactive power.

Characteristics of magnetism include, but are not limited to, control signals, load types, and reactive power displays on the unit. When dealing with inductive microprocessors and reactive power displays, it will be a positive 70 kV and a negative 50 kV.

8440-2058 该控制的功率部分是一个电阻电路

【其他型号推荐】