8440-1858 由近60个终端组成

【产品详情】

8440-1858控制由近60个终端组成，每个终端都有特定的用途。端子22 ~ 29作为市电母线电压，在任何情况下都不能同时测量母线电压和主电压。

当用三相和四线制母线绕组测量输入时，与控制器的母线电压有关，有特定的端子要连接，其中几个端子在不同的额定电压和测量范围下读取。端子23、25、27和29的最大测量范围为0至600 Vac，额定电压范围为131至480 V，读数为480 V。

这种控制可以用于柴油或汽油发动机。发动机的点火延迟应在0-999秒范围内，但具体为5秒。在启动发动机之前，你应该进行一次排气操作。如果在有一个到期的时间和点火的最低速度已经达到这表明点火已经完全通电。一旦达到点火速度，那么起动器在许多不同的条件下被分离，通过磁拾取的测量已被解除，点火速度已被发电机电压测量。

如果您有兴趣购买控制8440-1858，您可以通过电话或电子邮件联系我们的销售团队。

8440-1858 由近60个终端组成

【英文介绍】

The 8440-1858 control consists of nearly 60 terminals, each with a specific purpose. Terminals 22 to 29 are used as the mains bus voltage. In any case, the bus voltage and main voltage cannot be measured at the same time.

When the input is measured with three-phase and four-wire bus windings, there are specific terminals to be connected in relation to the controller's bus voltage, several of which are read at different voltage ratings and measurement ranges. Terminals 23, 25, 27 and 29 have a maximum measuring range of 0 to 600 Vac, a rated voltage range of 131 to 480 V, and a reading of 480 V.

This control can be used for diesel or gasoline engines. The ignition delay of the engine should be in the range of 0-999 seconds, but it is specifically 5 seconds. Before starting the engine, you should perform an exhaust operation. If there is an expiration time and the minimum ignition speed has been reached this indicates that the ignition has been fully energized. Once the ignition speed is reached, then the starter is separated under many different conditions, the measurement by magnetic pickup has been disengaged, and the ignition speed has been measured by the generator voltage.

If you are interested in purchasing Control 8440-1858, you can contact our sales team by phone or email.

8440-1858 由近60个终端组成

【其他型号推荐】