8440-1855 EasyGen2000系列 管理状态指示器

【产品详情】

控制模型8440-1855是来自伍德沃德的EasyGen2000系列。8440-1855控件用于管理状态指示器，所需的所有信息将显示在该控件的显示屏上。

该控制配备了五十九个终端，它们都有不同的用途，如果使用MPU与您的控制，它必须连接到终端五十六和五十七，正引线将连接到终端五十六和负引线将连接到终端五十七，不正确连接引线将干扰峰值性能。

电源严格接在端子53上，端子54也与电源配合使用，但不应使用直接电源。当将电源连接到端子50 - 3时，电源额定电压应为8vdc ~ 40vdc。

当安装控制，确保你不钻孔到塑料外壳单元，如果你这样做，你将无法使用夹具紧固件。在操作控制和测量三相输入时，设备上的三线设置确保控制上的额定电压应在50-130 V范围内读取，或者可能在131-480 V范围内读取，具体取决于所使用的控制。

8440-1855 EasyGen2000系列 管理状态指示器

【英文介绍】

The control model 8440-1855 is from Woodward's EasyGen2000 series. The 8440-1855 control is used to manage the status indicator, and all the required information is displayed on the display of the control.

The control is equipped with fifty-nine terminals, they all have different purposes, if using the MPU with your control, it must be connected to terminals fifty-six and fifty-seven, the positive leads will be connected to terminals fifty-six and the negative leads will be connected to terminals fifty-seven, improperly connected leads will interfere with peak performance.

The power supply is strictly connected to terminal 53, and terminal 54 is also used with the power supply, but the direct power supply should not be used. When connecting the power supply to terminal 50-3, the rated voltage of the power supply should be 8vdc to 40vdc.

When installing controls, make sure you do not drill into the plastic housing unit, if you do, you will not be able to use the fixture fasteners. When operating the control and measuring the three-phase input, the three-wire Settings on the device ensure that the rated voltage on the control should be read in the range of 50-130 V, or possibly in the range of 131-480 V, depending on the control used.

8440-1855 EasyGen2000系列 管理状态指示器

【其他型号推荐】