8440-1923 多功能发电机组控制器 具有控制电压

☆型号：8440-1923 多功能发电机组控制器 具有控制电压

【产品详情】

伍德沃德公司生产 easYgen-3000 系列的 8440-1923 控制器型号，请注意，8440-1923 控制器也标记为 easYgen-3200-5-P1。3000 系列中的 easYgen-3200 型号采用塑料封装，通常应安装夹紧固件安装套件，但也可以使用螺钉套件安装。

该控制器具有控制电压和速度偏置输出的灵活输出，这些输出可自由配置，应配置为与稳压器和调速器配合使用。

8440-1923 控制器提供 PWM、电流和电压模拟输入，适用于多种不同型号的应用，这三个模拟输入通常用于电压和速度偏置。控制器的外部跳线和配置可能会改变多功能控制器的输出信号。

8440-1923 控制器具有可配置的频率/电压控制功能，允许手动控制控制器内的断路器。控制器内还有一个无功功率调节功能，无功调节发生在电网交换点。控制器上有一个主工作频率，这些参数通常会触发控制器内的主要故障条件，然后激活紧急运行序列。

当您使用控制器时，相移在频率参数的变化范围内，这通常称为电压曲线的突然变化，可能是由控制器内的发电机负载发生重大变化引起的。

☆型号：8440-1923 多功能发电机组控制器 具有控制电压

【英文介绍】

The Woodward Company produces the easYgen-3000 series 8440-1923 controller model, please note that the 8440-1923 controller is also labeled easYgen-3200-5-P1. The easYgen-3200 model in the 3000 series comes in a plastic package and should normally be fitted with a clamp fastener mounting kit, but can also be fitted using a screw kit.

The controller has flexible outputs for controlling voltage and speed bias outputs, which are freely configurable and should be configured for use with voltage regulators and governors.

The 8440-1923 controller offers PWM, current, and voltage analog inputs for a variety of different models of applications, and these three analog inputs are typically used for voltage and speed bias. External jumpers and configurations of the controller may change the output signal of the multifunction controller.

The 8440-1923 controller has a configurable frequency/voltage control function that allows manual control of circuit breakers within the controller. There is also a reactive power regulation function in the controller, which occurs at the grid exchange point. There is a primary operating frequency on the controller, and these parameters typically trigger the primary failure condition within the controller, which then activates the emergency run sequence.

When you use a controller, the phase shift is within the range of a change in the frequency parameter, which is often called a sudden change in the voltage curve and can be caused by a significant change in the generator load within the controller.

☆型号：8440-1923 多功能发电机组控制器 具有控制电压

【其他型号推荐】