TC-505-02-4M5 可信TMR I/O SmartSlot槽位

☆型号：TC-505-02-4M5 可信TMR I/O SmartSlot槽位

【产品详情】

可信TMR I/O SmartSlot槽位电缆

产品概述

本文档提供了Trusted®I/O (input/output)线缆的详细信息

在SmartSlot组中可用。这些类型的电缆提供连接设施之间的

可信的模拟和数字输入/输出模块，以及可信的现场终端组件

(FTAs)或可信通用现场终端组件(VFTAs)根据需要。电缆也是

可在一端提供“飞线”，以便连接到条件端子。

目前可用的可信I/O smartlot电缆类型列在第4页的表1中。

电缆是根据用户要求制造的，因此电缆绝缘的长度和类型

必须指定。长度必须以xmx格式指定到最接近的0.5 m，例如，a为2m0

电缆长度2.0 m。此细节必须添加到零件号的末尾。请注意

电缆长度是首选选项，可能更容易获得;请参阅罗克韦尔自动化

细节。电缆绝缘类型是电缆部件号的一部分，用02表示

低烟零卤(LSZH)或03 UL认证电缆材料。02也是阻燃的

订购电缆时，建议用户提供如下详细信息

如图1所示。

建议I/O线缆长度不超过15m。如果需要，可以指定比这个长度长的电缆

必要的，但可能会受到电压下降，失调，串扰和噪声的影响，并将呈现材料

处理问题。

内部电缆是为连接在相邻机箱中的电缆而设计的。如果

电缆需要离开外壳环境，外部电缆有更多的保护。请注意,

“外部”电缆没有铠装，不适合真正的外部使用，必须仍然是

小心对待。这些电缆在通过电缆路线时需要保护，并且应该

也不能被连接器拉动。它们应该通过运输/压缩进入橱柜

阻塞和不能被填充。

本文档中介绍的smartlot线缆可以实现热插拔模块间的隔离

根据需要选择槽位，用smartlot跳线连接。对于“配套槽位”线缆，使用双宽机箱插座将热插拔模块放置在相邻槽位上，请参见可信I/O

配套槽位电缆，出版物ICSTT-RM311 (PD-TC200)

☆型号：TC-505-02-4M5 可信TMR I/O SmartSlot槽位

【英文介绍】

Trusted TMR I/O SmartSlot slot cable

Product overview

This document provides detailed information about Trusted®I/O (input/output) cables

Available in SmartSlot groups. These types of cables provide connections between facilities

Trusted analog and digital input/output modules, and trusted field terminal components

(FTAs) or Trusted Universal Field Terminal Components (VFTAs) as required. So are cables.

A "fly wire" can be provided at one end for connection to the condition terminal.

The types of trusted I/O smartlot cables currently available are listed in Table 1 on page 4.

Cables are manufactured according to user requirements, hence the length and type of cable insulation

Must be specified. The length must be specified in xmx format to the nearest 0.5 m, for example, a is 2m0

The cable length is 2.0 m. This detail must be added to the end of the part number. Attention please

Cable length is the preferred option and may be easier to obtain; See Rockwell Automation

Details. The cable insulation type is part of the cable part number and is represented by 02

Low smoke Zero halogen (LSZH) or 03 UL certified cable material. 02 is also flame retardant

When ordering cables, you are advised to provide the following details

As shown in Figure 1.

It is recommended that the length of an I/O cable not exceed 15m. If desired, you can specify a cable longer than this length

Necessary, but may be affected by voltage drop, offset, crosstalk and noise, and will present the material

Deal with the problem.

Internal cables are designed for cables connected in adjacent cases. if

Cables need to leave the enclosure environment, and external cables have more protection. Please note,

"External" cables are not armored, are not suitable for true external use, and must still be

Be careful. These cables need protection as they pass through the cable route, and should

It can't be pulled by the connector. They should be transported/compressed into the cabinet

Blocked and cannot be filled.

The smartlot cables described in this document can isolate hot-swapable modules

Select a slot as required and connect it with a smartlot jumper. For Matching slot cables, use a double-width chassis socket to place the hot  module in an adjacent slot. For details, see Trusted I/O

Matching Slot cable, publication ICSTT-RM311 (PD-TC200)

☆型号：TC-505-02-4M5 可信TMR I/O SmartSlot槽位

【其他型号推荐】