SAT CM3142-01-03 CPU模块

SAT CM3142-01-03 CPU模块

SAT CM3142-01-03 CPU模块

 数据以固定大小的块在内存和缓存之间传输，称为缓存线或者缓存块。当将高速缓存行从存储器复制到高速缓存中时，创建高速缓存条目。高速缓存条目将包括复制的数据以及请求的存储器位置(称为标签)。当处理器需要读取或写入内存中的某个位置时，它首先在缓存中检查相应的条目。高速缓存在可能包含该地址的任何高速缓存行中检查所请求的存储器位置的内容。如果处理器发现内存位置在缓存中，则缓存命中已经发生了。但是，如果处理器在缓存中找不到内存位置，则会引发缓存未命中已经发生了。在高速缓存命中的情况下，处理器立即读取或写入高速缓存行中的数据。对于高速缓存未命中，高速缓存分配一个新的条目并从主存储器复制数据，然后从高速缓存的内容满足请求。

4个动态信号的信号接口卡输入和2个转速表(速度)的输入，为MPC4机械防护卡螺钉端子连接器(48个端子)输入/输出连接包含4个可归属的继电器报警信号，由软件控制32个完全可编程的开路集电极输出(跳线可选)到IRC4和RLC16继电器卡片缓冲“原始”传感器信号和模拟输出振动信号(电压或电流)渠道所有输入和输出的EMI保护实时插卡和拔卡(热插拔)可提供“标准”和“独立电路”版本 

转换器的程序控制由基本握手序列组成。稳定延迟直接发生在模拟网络（例如选择新的输入信道），并表示网络的稳定时间。结算延迟完成后跟踪保持（T&H）放大器进入跟踪模式跟踪间隔开始。

通过支持云的功能增强了其 的 RobotStudio® 机器人编程和仿真软件。新的 RobotStudio Cloud 使个人和团队能够在世界任何地方、使用任何设备就机器人单元设计进行实时协作。自动版本控制新功能提高了团队间的透明度和生产力。该软件简化的界面和直观的导航使所有技能水平的用户都能从事机器人项目。  

SAT CM3142-01-03 CPU模块

Data is transferred between memory and cache in fixed-size blocks, which are called cache lines or cache blocks. A cache entry is created when a cache line is copied from memory into the cache. The cache entry will include the copied data and the requested memory location (called the tag). When a processor needs to read or write to a location in memory, it first checks the corresponding entry in the cache. The cache checks the contents of the requested memory location in any cache line that may contain the address. If the processor finds that the memory location is in the cache, a cache hit has occurred. However, if the processor cannot find a memory location in the cache, it will cause a cache miss to have occurred. In case of a cache hit, the processor immediately reads or writes the data in the cache line. For cache misses, the cache allocates a new entry and copies data from the main memory, and then satisfies the request from the contents of the cache.

Four dynamic signals are input to the signal interface card and two tachometers (speed). The input/output connection of the MPC4 mechanical protection card screw terminal connector (48 terminals) contains four attributable relay alarm signals. The software controls 32 fully programmable open collector outputs (jumpers are optional) to IRC4 and RLC16 relay cards to buffer "original" sensor signals and analog output vibration signals (voltage or current) for EMI protection of all inputs and outputs.

The program control of the converter consists of a basic handshake sequence. The settling delay occurs directly in the analog network (such as selecting a new input channel) and represents the settling time of the network. After the settlement delay is completed, the track-and-hold (T&H) amplifier enters the tracking mode and the tracking interval begins.

By supporting the function of cloud, the robot programming and simulation software of RobotStudio® is enhanced. The new RobotStudio Cloud enables individuals and teams to collaborate on robot cell design in real time anywhere in the world, using any device. The new function of automatic version control improves the transparency and productivity between teams. The software's simplified interface and intuitive navigation enable users of all skill levels to engage in robot projects.

SAT CM3142-01-03 CPU模块