IS220PDIOH1A 两个以太网端口  I/O 包模块

【产品详情】

IS220PDIOH1A是用于 Mark VIe Speedtronic 系统的 I/O 包模块。Mark VIe 是通用电气以 Speedtronic 名称发布的较晚系统之一。自 1960 年代后期通用电气发布 Mark I 以来，Speedtronic 系统一直用于工业涡轮机控制。

该IS220PDIOH1A有两个以太网端口和自己的本地处理器。它可以与端子板IS200TDBSH2A和IS200TDBTH2A结合使用。这些 I/O 封装/端子板组合已获准用于危险场所。

IS220PDIOH1A的最小额定电压为 27.4 VDC。其额定值为 28.0 VDC。该装置及其相关的端子板具有必须遵循的特定现场接线连接说明，包括电线尺寸和螺钉扭矩。此信息可在与本机相关的 GE 手册中找到，例如 GEH-6725。

IS220PDIOH1A的前面板包括两个以太网端口的 LED 指示灯、设备的电源指示灯以及“attn”LED。其他 LED 与继电器连接有关。

IS220PDIOH1A 两个以太网端口  I/O 包模块

【英文介绍】

IS220PDIOH1A is an I/O package module for Mark VIe Speedtronic systems. Mark VIe was one of the later systems released by General Electric under the name Speedtronic. Speedtronic systems have been used for industrial turbine control since the release of the Mark I by General Electric in the late 1960s.

The IS220PDIOH1A has two Ethernet ports and its own native processor. It can be used with the terminal boards IS200TDBSH2A and IS200TDBTH2A. These I/O package/terminal board combinations have been approved for use in hazardous locations.

The minimum rated voltage of the IS220P DioH1A is 27.4 VDC. Its rating is 28.0 VDC. The device and its associated terminal boards have specific field wiring connection instructions that must be followed, including wire size and screw torque. This information can be found in the GE manual associated with the unit, such as the GEH-6725.

The front panel of the IS220PDIOH1A includes LED indicators for the two Ethernet ports, power indicators for the device, and the "attn" LED. Other leds are related to relay connections.

IS220PDIOH1A 两个以太网端口  I/O 包模块

【其他型号推荐】