IS230STTCH2A 热电偶DIN导轨模块

【产品详情】

IS230STTCH2A：在项目树元素配置中定义的最大网关站点数。有关更多信息，请参阅第77页上的OPC功能块库的项目对象。硬件配置必须分配给资源（项目树），网关类型仅通过这种分配来定义。对于每个网关站的配置，可配置的数量。

最高的不可以在网关上加载的对象的最大数量。配置数据（PRAM）存储区域，单位为KB，可为配置数据保留。此存储区域是冷启动稳定的（仅使用DCP网关）。系统限制连接数配置的通信连接的最大数。有关更多信息，请参见第189页上的通信连接的配置。

IS230STTCH2A：这些数字会影响DCP网关内内存的分区。如果当网关中有大量对象时，在加载对象时发生错误，请更改这些设置以加载项目。

对于与操作员和网关站的数据交换，每个处理站有10个连接。对于OPC服务器（OPC-S）和操作员站之间的数据交换，每个OPC服务器有20个连接。如果配置了更多的操作员或网关站，则可以在通信配置对话框中定义自由职业者系统的所有用户的操作通信连接。

IS230STTCH2A 热电偶DIN导轨模块

【英文介绍】

IS230STTCH2A: The maximum number of gateway sites defined in the project tree element configuration. For more information, see the OPC Functional Block Library Project Object on page 77. The hardware configuration must be allocated to resources (project trees), and the gateway type is defined only by this allocation. For each gateway station configuration, the number of configurable.

Maximum Maximum number of objects that cannot be loaded on the gateway. Configuration data (PRAM) storage area, in KB, can be reserved for configuration data. This storage area is cold start stable (using only the DCP gateway). System Limit Connections Maximum number of communication connections configured. For more information, see Configuring Communication connections on page 189.

IS230STTCH2A: These numbers affect the partition of memory within the DCP gateway. If an error occurs while loading objects when there are a large number of objects in the gateway, change these Settings to load the project.

For data exchange with operators and gateway stations, there are 10 connections per processing station. For data exchange between OPC servers (OPC-S) and operator stations, each OPC server has 20 connections. If more operators or gateway stations are configured, you can define operational communication connections for all users of the freelancer system in the communication configuration dialog box.

IS230STTCH2A 热电偶DIN导轨模块

【其他型号推荐】