IC698CHS017B17 插槽后置 I/O 机架  旨在支持高功率 Rx7i PACsystem 电源

【产品详情】

GE Fanuc IC698CHS017 Rx7i I/O 机架是用于 Rx7i PACsystem 系列的 17 插槽后置 I/O 机架。与每个 Rx7i PACsystem 机架一样，IC698CHS017 机架旨在支持高功率 Rx7i PACsystem 电源，它配备了 VME64 背板，比基于 VME 的标准系统快近 4 倍，它支持所有标准 VME 模块，包括 VMIC 和 90-70 系列 I/O 模块。IC698CHS017 Rack 具有内置的插槽感应功能，无需在 I/O 模块上使用额外的跳线或 DIP 开关即可实现 I/O 参考寻址。IC698CHS017 Rack 支持更高瓦数的电源，并且兼容 Rx7i 交流电源插件。IC698CHS017 Rack 采用开放式设计，因此需要具有 IP 54 或更高等级的标准外壳才能在工厂车间使用

IC698CHS017 机架有 17 个编号为 1 到 17 的 I/O 插槽。插槽 1 到 17 的间距为 0.8 英寸，以容纳单插槽 I/O 模块。插槽 1 仅保留给 CPU 模块，而另一个称为“插槽 0”的插槽保留给电源。IC698CHS017机架支持 15 个单宽 I/O 模块、8 个双宽模块或双宽和单宽模块的组合。IC698CHS017 Rack 支持 350 瓦电源。它在 5 伏直流电下的总额定电流为 60 安培，在 -12 伏直流电下的总额定电流为 4 安培。与所有 Rx7i 机架一样，IC698CHS017 机架使用基于 Windows 的 CIMPLICITY Machine Edition Logic Developer-PLC 软件支持软件配置和 I/O 参考寻址。IC698CHS017架的标准尺寸为 11.2 x 19.0 x 7.5 英寸（高 x 宽 x 深），工作温度范围为 0 摄氏度至 60 摄氏度

IC698CHS017B17 插槽后置 I/O 机架  旨在支持高功率 Rx7i PACsystem 电源

【英文介绍】

The GE Fanuc IC698CHS017 Rx7i I/O rack is a 17-slot rear I/O rack for the Rx7i PACsystem series. Like every Rx7i PACsystem rack, the IC698CHS017 rack is designed to support a high power Rx7i PACsystem power supply, it is equipped with a VME64 backplane that is nearly 4 times faster than standard VME-based systems, it supports all standard VME modules, Includes VMIC and 90-70 series I/O modules. The IC698CHS017 Rack features built-in slot sensing, enabling I/O reference addressing without the use of additional jumpers or DIP switches on the I/O module. The IC698CHS017 Rack supports higher wattage power supplies and is compatible with the Rx7i AC power plug-in. The IC698CHS017 Rack has an open design and therefore requires a standard housing with IP 54 rating or higher to be used on the factory floor

The IC698CHS017 rack has 17 I/O slots numbered 1 to 17. Slots 1 through 17 are spaced 0.8 inches to accommodate single-slot I/O modules. Slot 1 is reserved only for the CPU module, while the other slot called "slot 0" is reserved for the power supply. The IC698CHS017 rack supports 15 single-width I/O modules, eight dual-width modules, or a combination of dual-width and single-width modules. The IC698CHS017 Rack supports a 350 Watt power supply. It has a total fixed current of 60 amps at 5 volts DC and 4 amps at -12 volts DC. Like all Rx7i racks, the IC698CHS017 racks support software configuration and I/O reference addressing using Windows-based CIMPLICITY Machine Edition Logic Developer-PLC software. The IC698CHS017 has a standard size of 11.2 x 19.0 x 7.5 inches (H x W x D) and an operating temperature range of 0 ° C to 60 ° C

IC698CHS017B17 插槽后置 I/O 机架  旨在支持高功率 Rx7i PACsystem 电源

【其他型号推荐】