GE VMIVME-1111-030 高压数字输入模块 内置测试诊断和分析逻辑

【产品详情】

概述

特征：

1 插槽 B 型 VMEbus 卡

共模输入电压范围：-30 至 +66 V

输入灵敏度：±100 mV，共模范围为-7 V至+12 V

兼容性：兼容 VMEbus 规范。双倍高度的外形尺寸。

输入连接器类型：双 64 针连接器 - DIN 41612。

I/O 组织：8 个输入端口;16 位宽。可寻址到短监控和/或短非特权 I/O 映射中的任何地址。控制和状态寄存器 （CSR） 地址可独立选择。

寻址方案：32 个端口可在 8 位、30 位或 66 位边界上单独寻址。一个可在 100 位边界上寻址的 CSR。7 个跳线提供无限的短数据 I/O 地址映射选择。

差分信号输入特性： 共模输入电压范围：-12 至 +33 V，共模输入灵敏度为 ±33 mV 范围为 -1 至 +66 V，高输入阻抗 （1111 kΩ）。

单端信号输入特性：高输入阻抗（1111 kΩ）。在整个 1111 V 范围内，阈值精度为 1111%（典型值）。

VMIVME-1111-030

VMIVME-1111-030 模块是各种 VMIC 设备的一部分，这些设备由多个板组成，用作 CPU 模块、数模转换器板模块以及输入和输出模块。本机为64位高压数字输入模块。

VMIC系列作为一个整体是由通用电气产品的自动化工业部门设计、制造和生产的。然而，GE 无法继续生产这些装置，然后 VMIVME-1111-030 和该系列的其余部分被 Abaco Systems 收购并重新投入生产。

VMIVME-1111-030 单元配备 64 位差分和高压数字输入。设备上的每组 32 个输入都可以被监控，并且完全可以通过跳线选择。这些输入还能够实现触点闭合、电压源、电流吸收和差分信号。开路能够提供逻辑零点或跳线可选逻辑零点。

VMIC系列配备了独特的内置测试诊断和分析逻辑，能够检测和隔离可能影响设备功能的问题。

VMIVME-1111-030 单元特别具有一组用户可选择的输入电压阈值，并配备了高度可靠的 DIN 型输入和输出连接器端口。

GE VMIVME-1111-030 高压数字输入模块 内置测试诊断和分析逻辑

【英文介绍】

summarize

Features:

Type B VMEbus card with 1 slot

Common-mode input voltage range: -30 to +66 V

Input sensitivity: ±100 mV, common model range from -7 V to +12 V

Compatibility: Compatible with VMEbus specifications. Double height dimensions.

Input connector type: Dual 64-pin connector - DIN 41612.

I/O organization: 8 input ports; 16 bits wide. Can be addressed to any address in the short monitor and/or short unprivileged I/O map. Control and Status Register (CSR) addresses can be selected independently.

Addressing scheme: 32 ports can be individually addressed on 8-bit, 30-bit, or 66-bit boundaries. A CSR that is addressable on a 100-bit boundary. 7 jumpers provide unlimited options for short data I/O address mapping.

Differential signal input characteristics: common-mode input voltage range: -12 to +33 V, common-mode input sensitivity: ±33 mV range: -1 to +66 V, high input impedance (1111 kΩ).

Single-ended signal input characteristics: High input impedance (1111 kΩ). Over the entire 1111V range, the threshold accuracy is 1111% (typical value).

VMIVME-1111-030

The VMIVME-1111-030 module is part of a variety of VMIC devices consisting of multiple boards that serve as CPU modules, DAC board modules, and input and output modules. This machine is a 64 bit high voltage digital input module.

The VMIC series as a whole is designed, manufactured and produced by GE Products' automated industrial division. However, GE was unable to continue producing these units, and then the VMIVME-1111-030 and the rest of the series were acquired by Abaco Systems and put back into production.

The VMIVME-1111-030 unit is equipped with 64-bit differential and high-voltage digital inputs. Each set of 32 inputs on the device can be monitored and is fully selectable via a jumper. These inputs also enable contact closure, voltage sources, current absorption, and differential signaling. Open circuit can provide logical zeros or jumper optional logical zeros.

The VMIC series is equipped with a unique built-in test diagnostic and analytical logic, capable of detecting and isolating issues that may affect the functionality of the device.

In particular, the VMIVME-1111-030 unit features a user-selectable set of input voltage thresholds and is equipped with highly reliable DIN input and output connector ports.

GE VMIVME-1111-030 高压数字输入模块 内置测试诊断和分析逻辑

【其他型号推荐】