STXDNS532 网络接口模块 负逻辑模块

【产品详情】

STXDNS532接口模块是GE Fanuc制造的DeviceNet网络接口模块。它是一个负逻辑模块，具有 24 伏直流输入和输出电压。它有 16 个输入点和 16 个输出点。该通信模块具有内置 I/O，支持最多 10 个模块的扩展。该RSTi模块在现代工业中用于自动化应用过程。它以降低安装成本和紧凑的尺寸而著称。STXDNS532接口模块易于安装，易于更换。网络模块的前部顶部有一个颜色编码的模块识别条。前部有一个可拆卸的接线端子，可以轻松安装和更换。DeviceNet 模块接受弹簧夹使用 14 AWG 电线连接。

GE Fanuc STXDNS532接口模块的额定电压为 24 伏直流电，现场电源电流为 10 安培。DeviceNet协议是一种工业通信协议，用于与同一网络中的不同设备进行通信。它安装在 I/O 机架的左侧。该模块通过了不同的工业和环境标准认证。STXDNS532接口模块需要无EMC噪声和腐蚀性气体的清洁环境才能正常运行，环境工作温度应设置在-20至50摄氏度之间，环境相对湿度为5%至90%，无冷凝。它带有可变波特率，可以根据需要自动协商。STXDNS532接口模块使用专用的 DeviceNet 电缆，连接器端带有 5 针连接器。电缆长度取决于波特率，范围在 100 到 500 米之间。

STXDNS532 网络接口模块 负逻辑模块

【英文介绍】

The STXDNS532 interface module is a DeviceNet network interface module manufactured by GE Fanuc. It is a negative logic module with 24 volts DC input and output voltage. It has 16 input points and 16 output points. The communication module has built-in I/O and supports expansion of up to 10 modules. The RSTi module is used to automate application processes in modern industry. It is known for its reduced installation costs and compact size. The STXDNS532 interface module is easy to install and replace. The front of the network module has a color-coded module identification strip at the top. The front has a detachable terminal that can be easily installed and replaced. DeviceNet modules accept spring clips connected using 14 AWG wires.

The GE Fanuc STXDNS532 interface module has a rated voltage of 24 volts DC and a field supply current of 10 amps. The DeviceNet protocol is an industrial communication protocol used to communicate with different devices in the same network. It is mounted on the left side of the I/O rack. The module is certified to different industrial and environmental standards. The STXDNS532 interface module requires a clean environment free of EMC noise and corrosive gases for normal operation. The ambient operating temperature should be set between -20 and 50 degrees Celsius, the ambient relative humidity should be 5% to 90%, and there is no condensation. It comes with a variable baud rate and can be automatically negotiated as needed. The STXDNS532 interface module uses a dedicated DeviceNet cable with a 5-pin connector at the connector end. The cable length depends on the baud rate and ranges from 100 to 500 meters.

STXDNS532 网络接口模块 负逻辑模块

【其他型号推荐】