STXDNS132 RSTi DeviceNet模块 负逻辑输入

【产品详情】

STXDNS132模块是由GE Fanuc制造的24伏直流额定RSTi DeviceNet模块。它带有负逻辑输入，并具有 32 个 I/O 点。该模块最多可扩展 10 个附加模块。它是一个基于以太网的I/O模块，可以提供最佳性能并提供操作灵活性。DeviceNet 开放式连接器的所有连接器点都位于前面板上。该模块可以使用 I/O 机架左侧的 DIN 导轨进行安装。STXDNS132模块的额定电压为 24 伏直流电。模块的现场电源电流额定值最大为 10 安培。Fn 总线的额定电流为 1.2 安培，直流电压为 5 伏。该模块有助于与RSTi系列中的其他设备进行内部通信。该模块通过了 UL、cUL 和 CE 标准认证。

GE Fanuc STXDNS132 RSTi DeviceNet 模块的节点地址可以通过使用位于模块前面的旋转拨盘轻松更改。DeviceNet模块的现场电源由外部电源供电。正面有LED指示灯，显示运行过程中的MOD、NET和I/O状态。波特率可以自动配置。STXDNS132 RSTi DeviceNet 模块最多支持 64 个节点。它还支持多达 2016 个数字 I/O 和 126 个模拟 I/O。该模块在运行期间可以在 Bit Strobe、COS、Cyclic 和 Polling 模式下运行。周围空气温度应设置在 -20 至 50 摄氏度之间，以便正常运行网络。

STXDNS132 RSTi DeviceNet模块 负逻辑输入

【英文介绍】

The STXDNS132 module is a 24-volt DC rated RSTi DeviceNet module manufactured by GE Fanuc. It has negative logic inputs and has 32 I/O points. The module can be extended up to 10 additional modules. It is an Ethernet-based I/O module that delivers optimal performance and provides operational flexibility. All connector points of DeviceNet Open connectors are located on the front panel. The module can be mounted using the DIN rail on the left side of the I/O rack. The STXDNS132 module has a rated voltage of 24 volts DC. The module's field power current rating is up to 10 amps. The Fn bus has a rated current of 1.2 amps and a DC voltage of 5 volts. This module facilitates internal communication with other devices in the RSTi family. The module is certified to UL, cUL and CE standards.

The node address of the GE Fanuc STXDNS132 RSTi DeviceNet module can be easily changed by using the rotary dial located on the front of the module. The on-site power supply of the DeviceNet module is powered by an external power supply. There are LED indicators on the front to show the status of MOD, NET and I/O during operation. The baud rate can be configured automatically. The STXDNS132 RSTi DeviceNet module supports a maximum of 64 nodes. It also supports up to 2,016 digital I/ OS and 126 analog I/ OS. The module can be run in Bit Strobe, COS, Cyclic, and Polling modes during runtime. The ambient air temperature should be set between -20 and 50 degrees Celsius for normal operation of the network.

STXDNS132 RSTi DeviceNet模块 负逻辑输入

【其他型号推荐】