GE Fanuc STXDNS116 内置继电器隔离输出

【产品详情】

STXDNS116模块是RSTi DeviceNet模块，内置继电器隔离输出。它由 GE Fanuc 制造。它带有 16 个输出点，可以支持使用 10 个附加模块进行扩展。RSTi 输出模块提供高性能的工业处理，并缩短了安装时间。该模块因其成本和时间效率而广泛用于工业自动化应用。该通信模块使用带有 5 个引脚的专用 DeviceNet 电缆。电缆长度范围为 100 至 500 米。该模块可以以 125、250 或 500 Kbps 的速度进行通信。它最多可以支持 64 个节点。通过使用滑动和锁定机构，STXDNS116模块可以很容易地安装在 I/O 系列机架的最左侧位置。它也可以通过使用DIN导轨进行安装。该模块尺寸紧凑，尺寸为 42 x 99 x 70 毫米。它重约 155 克。

STXDNS116 RSTi DeviceNet模块的前部有一个节点地址选择器，可以使用旋转拨盘进行更改。此外，模块顶部还有 LED 指示灯，指示模块中发生的不同事情。STXDNS116模块使用 30 伏直流电源耗散 24 毫安的电流。Fn 总线信号可以与系统电源和 GND 电源一起从正面连接。STXDNS116模块可用于不同的工作模式，包括位选通、轮询、循环和 COS 模式。该模块通过了 UL、cUL、CE 和其他标准认证。安装环境应清洁，无EMC噪声或灰尘和腐蚀性气体的痕迹。

GE Fanuc STXDNS116 内置继电器隔离输出

【英文介绍】

The STXDNS116 module is an RSTi DeviceNet module with built-in relay isolation output. It is manufactured by GE Fanuc. It comes with 16 output points and can be extended with 10 additional modules. RSTi output modules provide high performance industrial processing and reduce installation time. This module is widely used in industrial automation applications due to its cost and time efficiency. The communication module uses a dedicated DeviceNet cable with 5 pins. Cable lengths range from 100 to 500 meters. The module can communicate at 125, 250 or 500 Kbps. It can support up to 64 nodes. By using a sliding and locking mechanism, the STXDNS116 module can be easily installed on the far left side of the I/O series rack. It can also be installed by using DIN rails. The module is compact in size, measuring 42 x 99 x 70 mm. It weighs about 155 grams.

The STXDNS116 RSTi DeviceNet module has a node address selector on the front, which can be changed using a rotary dial. In addition, there are LED indicators on the top of the module that indicate different things happening in the module. The STXDNS116 module uses a 30 volt DC power supply to dissipate 24 mA of current. The Fn bus signal can be connected from the front with the system power supply and GND power supply. The STXDNS116 module can be used in different operating modes, including bit strobe, polling, loop and COS modes. The module is certified to UL, cUL, CE and other standards. The installation environment should be clean and free of EMC noise or traces of dust and corrosive gases.

GE Fanuc STXDNS116 内置继电器隔离输出

【其他型号推荐】